You're currently viewing posts by Pinsider SteveNZ.
Click here to go back to viewing the entire thread.
I'm working on a Gottlieb Baseball with the ball in play lights in the apron.
How are the instruction cards and backmask printed, cut and arranged.
Is the backmask printed on white paper/card?
Do I need to cut a slot in the instruction card where the numbers show through?
I have never seen this set up in real life, and want to get it looking right.
Thanks JR, I have the mask in PDF format so I can print it to white paper. I assume it should be paper as the light needs to shine through the white part, card would be too thick.
Is there another sheet of white paper between the mask and the instruction card? When I look at the apron of Baseball and other similar games on IPDB I can't see the numbers through the cutout.
Good point on the light divider, it is missing, I will have to have a go at 3d printing one. Does anyone have a 3d model for this?
You're currently viewing posts by Pinsider SteveNZ.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gottlieb-backmask-card-a-9995?tu=SteveNZ and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Wellington