New to trying to fix Pinball machines. I replaced the boards with new boards from Flippp!
Everything was working fine, except the controlled lights. GI lamps all seemed fine.
I was trying to understand the voltage flowing through the Tilt switch and accidentally shorted the solenoid switch to the controlled lights and the bonus lights flashed on the board.
I was trying to check the voltage at the field lamps, but had the meter set to ohms. When I touched the probe to the field light they all went out. So now the GI lamps are out.
All fuses seem good. What would have burned out?
Where would I start with the controlled lights? May have damaged something else when I shorted the solenoid.
Are there some fuses that might be hard to find?