I'm finally putting my #2001 back together, and after two PBR orders in the past week I just realized I don't have a schematic. Not usually a big deal, but I have a problem with the four targets below the center plastic. They're all dead, and all the wires, at least on the targets themselves, are intact. I'm guessing there's either a broken wire somewhere or there's a switch somewhere not making. If anybody has a schematic they can look at and give me some ideas, it would be greatly appreciated. Thanks!

Thank you! I'll let you know what I find.

Found it! There was a small green wire from the game over relay to the tilt relay that was broken off. Thanks Howard! Also, Peter Inkochnito gave me a couple things to look for. Now, I just have to figure out the ones reel not resetting properly, and I'm done. I've looked at those switches a dozen times or more, I must be overlooking something.

And...I figured that problem out. Of course it was one of the zero switches, just like I knew it was but couldn't quite grasp the first many times I looked. I'm going to blame old age and not drinking while I work on games.