(Topic ID: 222453)

GOT LE stuck at the Stern start screen


By Fordgt44

2 years ago



Topic Stats

  • 25 posts
  • 8 Pinsiders participating
  • Latest reply 2 years ago by skyrex
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

There have been 2 images uploaded to this topic. (View topic image gallery).

D8488448-A108-46B7-A1D6-54EEEDDC23A7 (resized).jpeg
ED41BECF-354B-4E76-9E7A-6A115B7531BE (resized).jpeg

You're currently viewing posts by Pinsider heme.
Click here to go back to viewing the entire thread.

#7 2 years ago

I vaguely remember something like that happening to me.
look at the cpu board are all the voltages checking out?
48 V, 12v, 3.3V and 5V they should have red LED's lit next to them.

#8 2 years ago

I was missing one of the voltages 48V I think, had to replace the CPU board. Luckily it was still under warranty at the time, early 2016.

if not, it might be something as simple as reloading the latest code again.

#12 2 years ago
Quoted from kermit24:

I bet your SD card is corrupted. I think swampfire had this issue on GOT.

yeah try to reload the code first. You could also try a new SD card if you have one, make sure it has the same amount of memory. I think its fat 12 which means if you go over the CPU won't be able to recognize the files. You will need to format the new SD appropriately as well.

second

which 2 voltages are you missing?
48V comes from the power supply and I think it's converted to the appropriate voltages via the CPU board & the other board near the power supply.

this could mean certain items on the cpu boards aren't getting the power they need. So a component on your cpu board is fried.

I don't remember the layout of the spike 1 cpu board, without seeing it, it'd be hard to verify that this is the case.
you can always test the points with a multimeter if you have one.

if the latter is true then your going to need a new CPU board. hopefully it's still under warranty because they cost 500 bucks. This is why I don't buy spike games second hand usually.

I'd call chas at tech support to verify this is the case before spending 500 bucks.

#14 2 years ago

wait a second

#15 2 years ago

so your missing 24V and 9V. let me check the manual, need to see where 24 and 9 are coming from.

#16 2 years ago

was the coin door closed when you took the pic?
wouldn't explain the 48V being on though.

COIN-DOOR SAFETY INTERLOCK
To protect the system and for user safety, power to the playfield
is disabled when the front coin door is opened. 48V system power
and 9V node bus power is disabled to all playfield components
until the switch is closed.

this is what the manual says about the status led's

24V +24V Audio Power Red ON: Audio power supply is good,
OFF: Audio power supply off, call
tech support.
9V +9V Node Bus Power Red ON: Node bus power supply is
good, OFF: Node bus power supply
bad, call tech support.

I'm not real sure where the node bus & audio power supply is... anyone?

#18 2 years ago
Quoted from kermit24:

No interlock on spike. Except WWE.

that's what I thought to, seemed weird seeing it in the manual.
didn't remember seeing an interlock switch at the coin door.

At this point I'd wait till Monday and verify your findings with Chas and hopefully he will help you with a resolution.

#20 2 years ago
Quoted from Chrlbrwn88:

This happened to mine. Exactly the same issues. I had to replace the cabinet node board on the left side.

the main cabinet node board? the larger one
or one of the smaller ones?

think this might vary from game to game, depending on what is impeding the boot sequence. Usually the smaller node boards are pointed out as not functioning on the display.

Promoted items from the Pinside Marketplace
$ 35.00
Cabinet - Other
Arcade Upkeep
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
$ 10.00
Playfield - Decals
Mods for your pinballs
$ 65.00
Lighting - Backbox
Arcade Upkeep
$ 79.99
Cabinet - Shooter Rods
Lighted Pinball Mods
$ 11.95
$ 25.00
Playfield - Toys/Add-ons
Rocket City Pinball
$ 279.95
Lighting - Led
Pin Stadium Pinball Mods
$ 349.95
Lighting - Led
Pin Stadium Pinball Mods

You're currently viewing posts by Pinsider heme.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside