Gorgar
Williams, 1979You're currently viewing posts by Pinsider JadedHesher.
Click here to go back to viewing the entire thread.
Well, it can't be anything too crazy.
From the coin box, start checking wires. See if any are getting pinched in the coin door.
Then go check your solder connections for any cold joints.
Wiggle wires while you look at the playfield.
And just for fun, check your power cord. If its a 3 prong but the ground is removed, then replace that ground. Make sure your power cable is good.
You're currently viewing posts by Pinsider JadedHesher.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gorgar-strange-controlled-lamp-issue?tu=JadedHesher and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
New York, NY