Tech: Howdy y’all. Acquired a Gorgar recently and it played well with sound for an hour. After that hour it locked up unexpectedly. It’s is unresponsive to flipper and start button. However, lights are on and flash. No sound. Any suggestions for troubleshooting?

3A0FB63C-1FB4-4E36-B28C-A7CF471EA160 (resized).jpeg

Here are some pics I took today, Tuesday. Sorry but this is my first pinball. Total noob. I’m good at many things but any kind of wiring is a head scratcher for me, for the most part.

The fourth pic of three fuses is at the bottom right of the Gorgar backbox.

These last two are at the bottom base of the backbox. Total I count 12 fuses in the backbox.

9C9ED182-5EC8-4BE5-8B5E-BBC5BE563431 (resized).jpeg

I will do that. Thanks for all yalls help. I will let y’all know once I’ve completed this task. I’m also open to any more/other suggestions.

Quick update: I replaced the F2 fuse with a proper 2.5 amp fuse. Gorgar still won’t turn over but at least it didn’t make the situation worse. I will continue replacing the fuses tomorrow when the stores open up. Oddly, found the 2.5 fuse at WalMart in a kit set after I had been to Home Depot and Lowe’s. Just extra info in case. 2.5 was pretty hard to find.

I will check those out. Thanks for the help y’all.

So I looked up Williams system 6 settings on YouTube and followed the instruction from a minute and half video. My Gorgar seems to be working at about 95% now as it turns on and plays with most of the sound. The 5% difference is that Gorgar himself doesn’t seem to want to talk anymore. Any advice for getting his voice back into the game? Thanks for yalls time and help.