Just purchased my first pinball machine on Saturday from my friends grandpa and it is Gorgar! It is in pretty bad shape but I think it will be a good learning project. I don't know anything about restoring pinball machines but would love to learn. I bookmarked vids guide and mofs resto so far from this thread. The ground on the plug is cut off so I'm going to start by putting a new 3 prong plug on and replacing a fuse that I noticed is broken on one of the boards. It starts up with 1496 1 on player 1 display and a 4 where the credits should be. I tried powering on and off twice with the coin door open and the codes go away. It then flashes 500000 and 000000 alternating in player 1's score. I pushed the button below the coin inserts and it gave me free credits I think. Well when I push start it says gorgar! speaks! and nothing happens, the ball doesn't launch. There is a heartbeat though. The flippers work (though the right flipper is missing its rubber). I used a knife to push the ball into the plunger so I could do a test run, from what I can see, the pops don't work and the drop targets are not popping up. There were 2 standing, I hit 1 and it is still down, won't pop up. Could these issues all be related to the broken fuse or do I have a series of unrelated problems to tackle here?

20161002_020006 (resized).jpg