You're currently viewing posts by Pinsider gorgar666.
Click here to go back to viewing the entire thread.
Quoted from Jojaco:I have Led's in my Gorgar for about 8 years now. All lights are replaced by LED. The Led beneath the 3X has a ghosting effect Only at start of New ball until it hits a switch. I use the non ghosting version Led's[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Nice
Quoted from Gnatty:My winter project last year. I play it all the time
[quoted image] [quoted image] [quoted image]
Where did you get apron and cards? Nice. I pick up this HUO Gorgar tomorrow WooHoo!
CB3AC8BA-2016-4FD7-8C19-2EC18BA6FEFB (resized).jpegQuoted from pinster68:Looking good bpull.
BTW. I highly recommend to all that you upgrade the speaker and add a subwoofer. Gorgar's beating heart felt through a subwoofer is awesome. [quoted image]
Isn’t Gorgar Mono sound? How can you add the 2nd Woofer. I’ll do it! Please explain...
Quoted from PhillyArcade:NVram for Gorgar 5101 ?
Yep
Quoted from PhillyArcade:Just noticed our Gorgar's are exactly 1000 serial numbers from each other.
Haha...
Quoted from PhillyArcade:My displays are acting strange now as well.
Replace the under valued resistors on the driver board.
D275F67B-0638-41DB-AFC3-D2534721E92C (resized).pngYes, those can be used. No, mine are the sausage type Lol, I didn’t do the work, don’t know where he bought them. Upkick Pinball repair is restoring my Boards on Gorgar. Pick up tomorrow!!!
Quoted from PhillyArcade:Added a little bling to Gorgar tonight in-between plays Tomorrow she gets shopped out finally.
[quoted image][quoted image][quoted image][quoted image]
Nice. I have the same...but Black Skull FOB.
Quoted from PhillyArcade:Added a little bling to Gorgar tonight in-between plays Tomorrow she gets shopped out finally.
[quoted image][quoted image][quoted image][quoted image]
Oh yes them Coin slot InsertS are sweet.
Quoted from Hyperion:New legs, levelers, bolts and leveler pads
[quoted image]
Nice legs you have Gorgar....
Quoted from Hyperion:All new
[quoted image][quoted image]
Looks nice man! Great job!
Quoted from Clytor:Horseshoe drops are a pain in the ass. Has anyone come up with a more reliable mod for them?
Nightmare. I payed someone. I never saw a drop, drop so slow before.....slow motion and 5 direct hit later....all good now...
Quoted from Gorgar666:Nightmare. I payed someone. I never saw a drop, drop so slow before.....slow motion and 5 direct hit later....all good now...
He told me. He had to remove a couple of the manufacturers Machine Screws. The drop mechanism was warped and binding.
Nice job.
Quoted from Moeman65:Took a few hours today and changed all lights underneath the playfield to led's. Well worth the time and effort. Backbox was changed by previous owner.
Sweet
I think Gorgar is the Perfect game to play faster. The floating ball and bouncy flippers get old after a whiles…lol
Yes, thanks for the pic! I will be following it closely! I just ordered new black “W” flipper bats, green titans flipper rings and quick connectors.
Quoted from sparksterz:Yeah...I really should do quick connectors more on my setups...would've been real nice for the drop targets but they didn't have much slack. If you want some different angles just let me know.
Thanks, also adding a bit more wire for slack. Most coils you see with shitty Solder jobs on the lugs is from people trying to solder in the vertical position. Get that Badboy on your work bench. I suck at it. Not gonna lie. Jajaja….
Quoted from JeffF:Did this today to my players condition Gorgar. Huge upgrade IMO. Makes the game play soo much better.
[quoted image][quoted image][quoted image][quoted image]
Nice, let’s see a picture from above the flippers. I wanna see the angle that you did from the return guides.
Quoted from JeffF:Thanks. They are basically just straight from the guides. I'll snap a picture tonight after work.
Can You Sweep the GOR targets now?
Removed working and parts are used original. Coils are good. $22 shipped. Flipper Rings are black Titans and like new. End of stroke I’ve seen worse….message me.
BTW…Gorgar Fans?
https://www.facebook.com/groups/3498499426859515/
Quoted from Clytor:Hardtop conversion done. Most things on the top side are new. I replaced a bunch of burned coils, damaged mechs and light sockets on the bottom. I added the following-
LEDs
Blue inserts under the stars
Light for saucer
Black and white colored target faces
Clear red pop bodies
NMP magnetic drop target sensors
Connectors on drop banks for ease of service
Fire effect leds under “gor” and “gar” inserts
I turned off the heartbeat and added demonically themed songs to play via the NW7’s jukebox feature. I only had to swap two coil drive pins to get this running in my 3-6 multi-pin cabinet(originally a Flash). I sanded and repainted the apron. The red on the apron decal from Planetary went super dark when I applied it. Other than that, I was super stoked on how it came out.
[quoted image]
Looks Great.
Quoted from SYS6:Grabbed a good Halloween mask
[quoted image]
Got another picture like this? Love it. Hope you don’t mind I shared it…
https://m.facebook.com/groups/3498499426859515/?ref=share&mibextid=S66gvF
Facebook Gorgar and friends share pics fan page.
You're currently viewing posts by Pinsider gorgar666.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gorgar-back-from-the-dead-and-terrifying?tu=gorgar666 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.