Is Goo Gone safe to use to get decal residue off of the Williams logo in the middle of a system 11 ball return apron? I picked up a used one off eBay because my current apron on my Jokerz has a decal shaped paint loss/fade/over scrubbed area on it's current apron where the Williams logo is, and the "new" one i got on eBay has a decal in the same area, so i wanna make sure i don't' do the same thing to this one when i go to remove the sticker.

See Pictures

Thanks!

20170722_204913 (resized).jpg
s-l1600 (resized).jpg

Thanks for all the replies guys!!

It is interesting that it doesn't seem to hurt the PF (I used it liberally on my whirlwind PF when i removed the mylar and it looked absolutely new) which to me i would assume to be "softer" then the paint on the apron. But i guess the "chemical makeup" may be different too.

Aside from WD-40, what about 91% isopropyl alcohol? I used that to remove all the goo on the mylar "insert" under the plastic upper PF of my jokerz when i installed a new upper PF, and it came out like new. Seemed to break it down pretty quickly too.