I have a gold wings pinball machine that does not have the gate wire form, it has the shaft spring c clip and plastic housing on the underside of the playing field, does anyone have these parts for sale or can someone take a short video of the wire form so I can make one. also having a problem with the lights on the runway on the topper, the two blue covered bulbs and the one red covered bulbs work fine but the runway bulbs work intermittently, I traced the wires back to the auxiliary lamp driver board and cleaned up the pins and connector and it worked for awhile then stopped again, any suggestions.

Kind regards
Dennis

IMG_1151-922.JPGIMG_1152.JPG

I know this is an old post but I never saw it for some reason or new I had replies to it, sorry about that, here is the topper, the only color lights are blue and red along with the clear runway lights. If you can get some close ups of the wire gate from topside and bottom of the playing field would be much appreciated.

IMG_1474 (resized).JPG

IMG_1473 (resized).JPG

IMG_1475 (resized).JPG

IMG_1472 (resized).JPG