I want one please.
You're currently viewing posts by Pinsider bigdaddy1000.
Click here to go back to viewing the entire thread.
Just got mine installed. Quick and easy - good instructions. On my GI sense wiring, the red and black were backwards, meaning on the mini pigtail cable the wires don't match up to the longer cable when I plug it in. Red goes to black and vice versa. Assume this shouldn't be an issue? Everything seemed to be working fine and the sign was flashing and lit up and going dark when everything else went dark.
I just flashed the firmware to the version 1.1 and now my sign is not flashing or lighting up at all. I did try to reboot the machine, same result. I can still connect to the network and browse to 192.168.4.1, but I'm unable to connect the game to my WIFI (it just says Connecting) indefinitely.
Here are my settings in case that helps with troubleshooting @stumblor:
c: Version Godzilla "Tokyo Neon" sign mod
c: FirmwareVersion v1.1.0
c: NumPatterns 8
c: WifiName brIF
c: Brightness1 140
c: Brightness2 140
c: Brightness3 140
c: Brightness4 160
c: Brightness5 120
c: WifiTimeout 0
c: NumSensors 7
c: NumRings 7
c: FlashGapMs 50
c: OffDelayMs 1200
c: FlashCount 10
c: GIDimmingDelayMs 800
c: GIDimmingOn Yes
c: GIDimmingForce 0
c: GIDimmingMiniumum 0
c: GIDimmingSensor 1
l: 0 RingRestColour 251072196
l: 0 RingRestColourSet 0000000000
l: 0 AtRestAction 0
l: 0 RestColourSaturation 255
l: 1 RingRestColour 251072196
l: 1 RingRestColourSet 0000000000
l: 1 AtRestAction 0
l: 1 RestColourSaturation 255
l: 2 RingRestColour 251072196
l: 2 RingRestColourSet 0000000000
l: 2 AtRestAction 1
l: 2 RestColourSaturation 255
l: 3 RingRestColour 255000017
l: 3 RingRestColourSet 0000000000
l: 3 AtRestAction 0
l: 3 RestColourSaturation 255
l: 4 RingRestColour 255207148
l: 4 RingRestColourSet 0000000001
l: 4 AtRestAction 7
l: 4 RestColourSaturation 255
l: 5 RingRestColour 255207148
l: 5 RingRestColourSet 0000000101
l: 5 AtRestAction 0
l: 5 RestColourSaturation 255
l: 6 RingRestColour 255207148
l: 6 RingRestColourSet 0000000001
l: 6 AtRestAction 0
l: 6 RestColourSaturation 255
s: 0 RingColour 255255000
s: 0 RingColourSet 1000000000
s: 0 RingColourRandom 0
s: 0 TriggerAction 1
s: 0 ColourSaturation 255
s: 1 RingColour 255255000
s: 1 RingColourSet 1000000000
s: 1 RingColourRandom 0
s: 1 TriggerAction 1
s: 1 ColourSaturation 255
s: 2 RingColour 255255000
s: 2 RingColourSet 1000000000
s: 2 RingColourRandom 0
s: 2 TriggerAction 1
s: 2 ColourSaturation 255
s: 3 RingColour 255000000
s: 3 RingColourSet 0010000000
s: 3 RingColourRandom 0
s: 3 TriggerAction 5
s: 3 ColourSaturation 255
s: 4 RingColour 255221153
s: 4 RingColourSet 0000000001
s: 4 RingColourRandom 255
s: 4 TriggerAction 7
s: 4 ColourSaturation 255
s: 5 RingColour 255204145
s: 5 RingColourSet 0000000001
s: 5 RingColourRandom 255
s: 5 TriggerAction 7
s: 5 ColourSaturation 255
s: 6 RingColour 255205143
s: 6 RingColourSet 0000000001
s: 6 RingColourRandom 255
s: 6 TriggerAction 7
s: 6 ColourSaturation 255
p: 0 Name At Rest
p: 0 CycleTime 1
p: 0 SpinSpeed 1
p: 0 Brightness 16
p: 0 Spin 0
p: 0 Brightness2 255
p: 0 Spin2 255
p: 0 RGB 1
p: 0 RGBSpin 255
p: 0 IncludeInRandom 0
p: 0 Intensity 255
p: 1 Name Bounce
p: 1 CycleTime 255
p: 1 SpinSpeed 10
p: 1 Brightness 1
p: 1 Spin 8
p: 1 Brightness2 255
p: 1 Spin2 255
p: 1 RGB 5
p: 1 RGBSpin 8
p: 1 IncludeInRandom 1
p: 1 Intensity 255
p: 2 Name Linear Tilted
p: 2 CycleTime 60
p: 2 SpinSpeed 14
p: 2 Brightness 8
p: 2 Spin 1
p: 2 Brightness2 255
p: 2 Spin2 255
p: 2 RGB 9
p: 2 RGBSpin 1
p: 2 IncludeInRandom 1
p: 2 Intensity 255
p: 3 Name Chase
p: 3 CycleTime 40
p: 3 SpinSpeed 80
p: 3 Brightness 2
p: 3 Spin 1
p: 3 Brightness2 255
p: 3 Spin2 255
p: 3 RGB 9
p: 3 RGBSpin 2
p: 3 IncludeInRandom 1
p: 3 Intensity 255
p: 4 Name Slow Sine
p: 4 CycleTime 180
p: 4 SpinSpeed 10
p: 4 Brightness 13
p: 4 Spin 7
p: 4 Brightness2 255
p: 4 Spin2 255
p: 4 RGB 8
p: 4 RGBSpin 2
p: 4 IncludeInRandom 1
p: 4 Intensity 255
p: 5 Name Fire
p: 5 CycleTime 30
p: 5 SpinSpeed 240
p: 5 Brightness 15
p: 5 Spin 255
p: 5 Brightness2 255
p: 5 Spin2 255
p: 5 RGB 255
p: 5 RGBSpin 255
p: 5 IncludeInRandom 0
p: 5 Intensity 230
p: 6 Name Glitch
p: 6 CycleTime 100
p: 6 SpinSpeed 70
p: 6 Brightness 20
p: 6 Spin 255
p: 6 Brightness2 255
p: 6 Spin2 255
p: 6 RGB 255
p: 6 RGBSpin 255
p: 6 IncludeInRandom 0
p: 6 Intensity 255
p: 7 Name Sign Glitter
p: 7 CycleTime 255
p: 7 SpinSpeed 40
p: 7 Brightness 7
p: 7 Spin 1
p: 7 Brightness2 7
p: 7 Spin2 2
p: 7 RGB 11
p: 7 RGBSpin 3
p: 7 IncludeInRandom 0
p: 7 Intensity 100
p: 8 Name
p: 8 CycleTime 255
p: 8 SpinSpeed 20
p: 8 Brightness 14
p: 8 Spin 2
p: 8 Brightness2 0
p: 8 Spin2 0
p: 8 RGB 14
p: 8 RGBSpin 2
p: 8 IncludeInRandom 0
p: 8 Intensity 255
Quoted from wxforecaster:Installation was simple. However, I have two suggestions for instruction improvements.
1.) If owner wishes to change the acrylic, this should be done PRIOR to the install. It's just so much easier that way.
2.) The GI wiring should be done at the same time as the main harness wiring to make it easier. If you (for some crazy reason) don't want to use the GI feature, then simply zip tie up the cable beneath the playfield and don't attach it to the GI socket. (Or perhaps even leaving the jumper at OFF would suffice?)
Agree - this makes way more sense to me as well.
You're currently viewing posts by Pinsider bigdaddy1000.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/godzilla-tokyo-neon-sign-mod?tu=bigdaddy1000 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.