Looks great! Add me to the list, full kit premium
You're currently viewing posts by Pinsider mzhulk.
Click here to go back to viewing the entire thread.
I found it was easier to use solder and solder the wires to it and pull them threw the pop bumpers no need to take anything apart. The solder was thick enough to not bend. Also I had to grind down the pins using my dremel on the back of the little sling shot boards so it sat flat on the playfield
20230312_143050 (resized).jpg20230312_162551 (resized).jpgIt took me around 3 hours to install the full kit just becouse I soldered all the wires to the switches and made it look like it was factory
So on completing the install it seems that the pop bumper will trigger everything, both slings and the godzilla backbox led. All the other trigger points both slings and backbox led do nothing when triggered. All the lights work in attract mode. Everything is hooked up correctly
It doesn't matter if it's on or off, if you turn it on it controls everything if off it controls just the ufo but nothing else works. Everything works as it should when you hit the test button on everything but the odd thing is none of the other trigger points work except the ufo pop bumper switch. I even put the left sling shot trigger wire into the ufo port J2A and it will not set off the ufo even thou it tested fine on my meter
Update well I just notice that only 2 of the green lights are on for the trigger switches. The left and right sling shots are off thats probably why it can not be set off. I soldered the wires directly to the switch but no green light. I think that is the problem, maybe i will try reversing the wires on the sling shot switch.
Working i switched the wires on the sling switches and it works, don't know why it needs to be a certain why as its just a leaf switch. At least I learned how to use the app pretty good
You're currently viewing posts by Pinsider mzhulk.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/godzilla-lolly-ufo-mod-kit?tu=mzhulk and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.