Add me for an extended version please, Premium Godzilla. thanks !
You're currently viewing posts by Pinsider matt_assassin.
Click here to go back to viewing the entire thread.
Quoted from jackd104:Will install atomic Gz today. The instructions recommend hooking it up to the Magna grab target. I am thinking of doing it to the center spinner because that’s the shot that charges heat ray. Seems to make sense. Was also thinking it would be cool to hook it up to action button for firing heat ray but I don’t think the wire is long enough. What have people done? Anyone gotten creative with this?
Edit: it is done. Hooking up to the center spinner was not an issue. Kind of neat how GZ flashes when the spinner rips. Pairs well. Poor original Godzilla has been exiled to Pac-Man Land. [quoted image][quoted image]
If you can, could you post a picture of the spinner hooking wires ? Thanks
Quoted from jackd104:Not sure I’ll have the game open again any time soon but…. If you lift the playfield, there’s a hole just above (in the direction of the front of the pf) where the center spinner sits and there are two pairs if wires coming down through this hole. Each one connects to a molex plug. The spinner is the one that has a black and a white wire (the other one is some other colors, forget which). I found it easiest to disconnect the molex to attach the clip thing. I also had to peel back a little bit of the tubing that surrounds the black and white wires coming from the spinner.
Thanks ! I will do it, since I have to get my red's back, tried comet's flame LED and does not the result I expected.
quick one to you guys, is it easy to remove the connector provided for the magnet, mine is already installed. Seems pretty stiff.
You're currently viewing posts by Pinsider matt_assassin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/godzilla-atomic-godzilla-figure-mod?tu=matt_assassin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.