Godzilla (Limited Edition)
Stern, 2021
Godzilla (Premium)
Stern, 2021
Godzilla (Pro)
Stern, 2021received mine about 4 days ago 
haven't installed yet, but BUT..I am now debating whether to install this in the PF or the Stern TOPPER..would this be ok to try on the topper instead? would really complete the light show up there!!
Quoted from KING-HENRY:received mine about 4 days ago haven't installed yet, but BUT..I am now debating whether to install this in the PF or the Stern TOPPER..would this be ok to try on the topper instead? would really complete the light show up there!!
There are some guys that have put it on the topper and it sounded like it needed a bit of fettling with some spacers/adapters to screw the feet in…can anyone chime in on this? I don’t have a topper so can’t comment. I may try to get one towards the end of the run to see if I can make an adapter set, but that’s a way off yet.
Quoted from Jazzbouche:There are some guys that have put it on the topper and it sounded like it needed a bit of fettling with some spacers/adapters to screw the feet in…can anyone chime in on this? I don’t have a topper so can’t comment. I may try to get one towards the end of the run to see if I can make an adapter set, but that’s a way off yet.
If it’s just a spacer issue i can solve that easily. I already have an aftermarket GZ up on the topper already, and ive removed a few spacers already. The trick is really deciding at this point; I’m fresh outta bubblegum in mod-spending..lol i have way over 2K of mods on GZ alone (yes, I want another Atomic GZ dammit 
) def want a second one down the road, then you’ll have the ‘topper version’ 
In fact, it would be really REALLY cool if us verified buyers of a previous Atomic GZ could buy a 'Atomic Topper GZ' that bypasses the need to buy another board, and would essentially be the GZ itself (and modded spacers/plexi to plop onto the topper?), along with a Y-Splitter for the previously-bought board, and tap into Our existing AGZ's ..and would prove to be much more cost-effecient (on both ends!) for existing owners while really 'topping off' this beautiful AGZ.. 
You could even sell the whole 2-1 kit for new customers.. eh?
Just printed the instructions. It is a book and somewhat over whelmed me. Seeing I have other Mods as well to be installed, there was a good section on using splitters to power everything. God grant me strength.
Quoted from KING-HENRY:In fact, it would be really REALLY cool if us verified buyers of a previous Atomic GZ could buy a 'Atomic Topper GZ' that bypasses the need to buy another board, and would essentially be the GZ itself (and modded spacers/plexi to plop onto the topper?), along with a Y-Splitter for the previously-bought board, and tap into Our existing AGZ's ..and would prove to be much more cost-effecient (on both ends!) for existing owners while really 'topping off' this beautiful AGZ.. You could even sell the whole 2-1 kit for new customers.. eh?
Yes, I’ll be looking into options along these lines once I get closer to fulfilling the current list of orders. It’s a good suggestion!! I’ll see what’s possible.
Quoted from Tophervette:Just printed the instructions. It is a book and somewhat over whelmed me. Seeing I have other Mods as well to be installed, there was a good section on using splitters to power everything. God grant me strength.
Sorry - it’s a fine line between making sure we cover every possible issue and make things as clear as possible, and not over complicating things. But that’s also why we share the video links showing YouTube videos of the installation. Watching the quick videos should hopefully make it pretty clear as to what’s in store. Send me a message though if you have any issues.
Quoted from Jazzbouche:Sorry - it’s a fine line between making sure we cover every possible issue and make things as clear as possible, and not over complicating things. But that’s also why we share the video links showing YouTube videos of the installation. Watching the quick videos should hopefully make it pretty clear as to what’s in store. Send me a message though if you have any issues.
I am not complaining. I am more of a try to figure it out and put it together, then later read the instructions. However, taking Godzilla out of the box and seeing the wires and the board, I figured I would try reading first this time. Then I read the instructions for the Lolly pop Saucer and Godzilla back box LED strip. I see that the 2 sets of instructions compliment each other. Which is fantastic.
I am #53 on the "Registered Interest 2" list. Any guess to what the timeline of getting the mod will be?
Hi Guys - working hard behind the scenes here on all my mods. Now we're into the reserve list for Atomic Godzilla I can't give exact timeframes, but know that I have parts in house and am in the process of painting various batches.
In the meantime though - I'm supporting project pinball and there is an Atomic Godzilla in there ready for bids (the current bidder has it at a great price, sorry for drawing attention to it!!). It's for a great cause, and if you're on the current list but make a successful bid then of course there's no issues on my side to pass your place to someone else.
Check it out and bid generously here:
https://projectpinball.rallyup.com/pinball-expo-2023-silent-auction/
Jazzbouche - I finally got my AG installed and it is so awesome! I was afraid to start attaching wires to a new out of the box machine, but glad I did. Once installed, I was worried about all the adjustments via wifi. I looked at the settings and decided to leave them alone. It works great, right out of the box.
Thanks for a great MOD.
Quoted from Jazzbouche:Hi Guys - working hard behind the scenes here on all my mods. Now we're into the reserve list for Atomic Godzilla I can't give exact timeframes, but know that I have parts in house and am in the process of painting various batches.
In the meantime though - I'm supporting project pinball and there is an Atomic Godzilla in there ready for bids (the current bidder has it at a great price, sorry for drawing attention to it!!). It's for a great cause, and if you're on the current list but make a successful bid then of course there's no issues on my side to pass your place to someone else.
Check it out and bid generously here:
https://projectpinball.rallyup.com/pinball-expo-2023-silent-auction/
Just placed a bid!
Please add me to the extended reserve list. Based on the size of list, this can fund your retirement!
Quoted from ToucanF16:Please add me to the extended reserve list. Based on the size of list, this can fund your retirement!
I’ll still be building them into my retirement too!
It’s an amazing amount of support everyone has shown. I’m away this week (school holiday), and need to finish the first batch of Bond Goldfinger mods (very close), but then will start assembly on all the Atomic Godzilla parts I’ve prepped. So hopefully will get some momentum back up and running soon!
Apologies if I’m slow to reply whilst away.
Quoted from Jazzbouche:Hi Guys - working hard behind the scenes here on all my mods. Now we're into the reserve list for Atomic Godzilla I can't give exact timeframes, but know that I have parts in house and am in the process of painting various batches.
In the meantime though - I'm supporting project pinball and there is an Atomic Godzilla in there ready for bids (the current bidder has it at a great price, sorry for drawing attention to it!!). It's for a great cause, and if you're on the current list but make a successful bid then of course there's no issues on my side to pass your place to someone else.
Check it out and bid generously here:
https://projectpinball.rallyup.com/pinball-expo-2023-silent-auction/
Is this the list for "Registered Interest #1" I'm guessing? Do you know if everyone in that list be able to get one?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/godzilla-atomic-godzilla-figure-mod/page/20 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Billings, MT
Dollard-des Ormeaux, QC
Borso Del Grappa
Nottingham