(Topic ID: 325497)

Atomic Godzilla Mod (List closed...Reserve list open)

By Jazzbouche

1 year ago


Topic Heartbeat

Topic Stats

  • 1,195 posts
  • 776 Pinsiders participating
  • Latest reply 28 hours ago by BMC-Omaha
  • Topic is favorited by 192 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

IMG_0649 (resized).jpeg
IMG_0646 (resized).jpeg
IMG_0637 (resized).jpeg
IMG_7181 (resized).png
IMG_7179 (resized).jpeg
PXL_20240226_024800927 (resized).jpg
IMG_0706 (resized).jpeg
Mojo-Xmas-2023 (resized).jpeg
IMG_4339 (resized).png
IMG_4340 (resized).png
IMG_4962 (resized).jpeg
IMG_8984 (resized).jpeg
MOD2 (resized).jpg
399615549_7262775673746652_7923878781659887707_n (resized).jpg
pasted_image (resized).png
awsomezilla (resized).png

There are 1,195 posts in this topic. You are on page 11 of 24.
#501 1 year ago
Quoted from Jazzbouche:

Hi - the LED strip patterns and colours can be changed via going online. The same way you can control Stumblors other products. It is in the instructions, but also comes preset so you don’t have to adjust anything if you don’t want to. Hope that helps.

I haven't modified my Tokyo Neon sign -- I'm not sure what that would look like. The default lighting looks so amazing I'm not sure if the extra work would be worth it. I'm curious what others think after having gone the extra mile to customize the lighting.

#502 1 year ago

Pro tip. When you unscrew the screws on the node board, the white standoffs might stay stuck to the metal plate. Use a small flathead screwdriver and wedge it under the post and it should dislodge. I had the same problem on my UFO kit but didn't discover this trick until now.

#503 1 year ago

Add me for an extended version as well thanks

#504 1 year ago

Extended for me please

#505 1 year ago

One more extended. Thanks

#506 1 year ago
Quoted from spidey:

Pro tip. When you unscrew the screws on the node board, the white standoffs might stay stuck to the metal plate. Use a small flathead screwdriver and wedge it under the post and it should dislodge. I had the same problem on my UFO kit but didn't discover this trick until now.

Great tip - I’ll get that added to the online instructions! Thanks.

#507 12 months ago

Extended please. Thank you.

#508 12 months ago

Extended please! Thanks!

#509 12 months ago

Just got home from work and it looks like Atomic Godzilla has landed.

This doesn’t look good though…

2C5D79E0-9B43-47F1-A04E-2ADAAA356B7A (resized).jpeg2C5D79E0-9B43-47F1-A04E-2ADAAA356B7A (resized).jpeg37001041-8B29-4861-A768-9FE6F0A74A57 (resized).jpeg37001041-8B29-4861-A768-9FE6F0A74A57 (resized).jpeg3B7F9F59-E453-4317-98D0-DF16129B9E60 (resized).jpeg3B7F9F59-E453-4317-98D0-DF16129B9E60 (resized).jpeg88A727E4-3702-4B33-B2F4-79445FA86087 (resized).jpeg88A727E4-3702-4B33-B2F4-79445FA86087 (resized).jpeg9123BC6E-8FF3-49C8-A58F-B5604E703CC9 (resized).jpeg9123BC6E-8FF3-49C8-A58F-B5604E703CC9 (resized).jpegE259E368-3093-49E1-ACC0-38C1A64B19D8 (resized).jpegE259E368-3093-49E1-ACC0-38C1A64B19D8 (resized).jpeg

Hope he survived!
To be continued…

#510 12 months ago
Quoted from Pinball-Obsessed:

Just got home from work and it looks like Atomic Godzilla has landed.
This doesn’t look good though…
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Wow! That’s insane! Were they playing football with it? Send me a message and we’ll sort you out.

#511 12 months ago
Quoted from Jazzbouche:

Wow! That’s insane! Were they playing football with it? Send me a message and we’ll sort you out.

I made a video while opened it, just in case.

But believe it or not, I can’t believe it, Godzilla survived! The bubble wrap did its job. It looks like all is ok.

Hopefully, once I get it installed it actually works. As much as I want to get this installed I’m Not sure if I’ll get installed today or not. Have a lot going on.

Here’s some pics I took after I unpacked it.

316F8395-B8EC-4EB3-BAD2-EC6154940F60 (resized).jpeg316F8395-B8EC-4EB3-BAD2-EC6154940F60 (resized).jpeg4ECF6C59-E9D3-4BEF-A5A5-6574BC02C956 (resized).jpeg4ECF6C59-E9D3-4BEF-A5A5-6574BC02C956 (resized).jpegA42F6F60-CE92-47AD-8738-CC0D97FA27E0 (resized).jpegA42F6F60-CE92-47AD-8738-CC0D97FA27E0 (resized).jpegB912DAF6-846E-4DE7-B7E7-6A40A3E4F510 (resized).jpegB912DAF6-846E-4DE7-B7E7-6A40A3E4F510 (resized).jpegD9906FBC-68F5-438C-8B96-14B0230C38FF (resized).jpegD9906FBC-68F5-438C-8B96-14B0230C38FF (resized).jpeg
#512 12 months ago
Quoted from Pinball-Obsessed:

I made a video while opened it, just in case.
But believe it or not, I can’t believe it, Godzilla survived! The bubble wrap did its job. It looks like all is ok.
Hopefully, once I get it installed it actually works. As much as I want to get this installed I’m Not sure if I’ll get installed today or not. Have a lot going on.
Here’s some pics I took after I unpacked it. [quoted image][quoted image][quoted image][quoted image][quoted image]

OMG…I thought it would be dust! Just little fragments left at the bottom of the box!! Amazing.

Let me know how you get on when you get to it, and if everything works! That little guy is a survivor!!

#513 12 months ago

Please add me to the list for the extended,
Thanks!

#514 12 months ago
Quoted from Pinball-Obsessed:

I made a video while opened it, just in case.
But believe it or not, I can’t believe it, Godzilla survived! The bubble wrap did its job. It looks like all is ok.
Hopefully, once I get it installed it actually works. As much as I want to get this installed I’m Not sure if I’ll get installed today or not. Have a lot going on.
Here’s some pics I took after I unpacked it. [quoted image][quoted image][quoted image][quoted image][quoted image]

Good Golly, Miss Molly - I can't believe my eyes!! Godzilla is awesome!

#515 12 months ago
Quoted from Pinball-Obsessed:

Just got home from work and it looks like Atomic Godzilla has landed.
This doesn’t look good though…
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Hope he survived!
To be continued…

Was this your delivery driver?

255BF008-568F-480C-8BE9-6856ACBE1FFA (resized).png255BF008-568F-480C-8BE9-6856ACBE1FFA (resized).png
#516 12 months ago

Add me to the list for the extended Atomic Godzilla.
Nice mod.

#517 12 months ago

Order #116 on its way down under!

Skippy2904

#518 12 months ago

Please put me on the list for a Atomic Godzilla Extended version.
Thank you!

#519 12 months ago

Hi!

Please put me on the list for a Atomic Godzilla Extended version.

#520 12 months ago

Please add me to the list for an Extended version

#521 12 months ago

Hi all. Does anyone know if in step 8 of the installation instructions you need to clamp both black wires or just a single one? The image of my wires are shown below and the image from the manual seems to show only a single black wire.

Here are the instructions(Inc photo with clipped wires):

Locate the Newton Ball Reed Switch. It can be a little tricky to find. There will be two wires coming out from it, and you need to clamp the T-Splice connector around them. Important: Follow the layout as shown on the sticker attached to the cable supplied…place the black wire on the ‘outside lane’ and the white wire on the ‘inside lane’, then close the housing around the cables by hand and double check that both wires are parallel and in their correct lanes. Press tightly using some pliers. You should hear a soft click.

81B0C2C8-9522-4530-9C5A-EB7D1B4AC6D8 (resized).png81B0C2C8-9522-4530-9C5A-EB7D1B4AC6D8 (resized).png9E8054E4-A8D1-4CE9-8F97-F761F6410BA1 (resized).jpeg9E8054E4-A8D1-4CE9-8F97-F761F6410BA1 (resized).jpeg
#522 12 months ago
Quoted from Had:

Hi all. Does anyone know if in step 8 of the installation instructions you need to clamp both black wires or just a single one? The image of my wires are shown below and the image from the manual seems to show only a single black wire.
Here are the instructions(Inc photo with clipped wires):
Locate the Newton Ball Reed Switch. It can be a little tricky to find. There will be two wires coming out from it, and you need to clamp the T-Splice connector around them. Important: Follow the layout as shown on the sticker attached to the cable supplied…place the black wire on the ‘outside lane’ and the white wire on the ‘inside lane’, then close the housing around the cables by hand and double check that both wires are parallel and in their correct lanes. Press tightly using some pliers. You should hear a soft click.[quoted image][quoted image]

Just one black wire!

#523 12 months ago

Please add me to the list for the extended version. Thank you!

#524 11 months ago

I would like the extended version. Thank you!

#525 11 months ago

Please add me to the list with the extended version.

#526 11 months ago

This is a very high quality product. I installed mine last week. It was a bit more difficult than I expected (getting the node board off a bit to slide the bracket in was not easy). It looks great and the light effects are super cool!

#527 11 months ago

Please add me to the list for the extended version.
Thanks!

#528 11 months ago

Please add me to the list for the extended version.

#529 11 months ago

Please add me for extended version! Just double checking, does this work for the pro version as well?

#530 11 months ago

I will take an Extended please!!

Thank you!!

#531 11 months ago

Put me down for the extended please!

New owner, just took delivery of the machine.

#532 11 months ago

Please add me for the extended version.

Thanks
Jeff

#533 11 months ago

please add me for an extended version

#534 11 months ago

Please add me to your list for one extended version for my Godzilla Premium. How do I get notified when the order is ready and needs to be paid? By email? Please use [email protected] thanks.

#535 11 months ago

Please put me down for an extended one! Amazing stuff! Thank you!

#536 11 months ago

Please add me to the list for the extended version

#537 11 months ago
Quoted from DJShooter:

Please add me to your list for one extended version for my Godzilla Premium. How do I get notified when the order is ready and needs to be paid? By email? Please use [email protected] thanks.

No problem at all - I've added you. When we get to your name on the list I'll send a Pinside message to you

Quoted from Wilberto757:

Please add me for extended version! Just double checking, does this work for the pro version as well?

Yes, absolutely - we have tested it on LE, Premium and Pro.

#538 11 months ago

Please add me to the list for the extended Godzilla version

#539 11 months ago

If there are any doubters out there…. Rest assured this thing is awesome

8BC3FC7A-DD55-4AFE-872D-9D74A952BF7A (resized).jpeg8BC3FC7A-DD55-4AFE-872D-9D74A952BF7A (resized).jpeg
#540 11 months ago

Count me in for a basic Godzilla! Looking forward to this awesome mod!

#541 11 months ago

Luckily, the creators of the Neon sign and Atomic Godzilla were at TPF this year. Glad I got on the waiting list for the Atomic Godzilla a long time ago, cause this zilla is sick. I mean beautiful detail and the atomic charge up is unreal. Best mod yet for zilla pins. Can't wait for this mod to go in my premium. Excellent work gentlemen.

#542 11 months ago

This looks amazing! Please sign me up for the extended Atomic Godzilla. Thanks

#543 11 months ago
Quoted from NC_Pin:

If there are any doubters out there…. Rest assured this thing is awesome [quoted image]

Thanks Man - really appreciate it your comments! And still love seeing these guys out in the wild!!

#544 11 months ago
Quoted from triplemercman:

Luckily, the creators of the Neon sign and Atomic Godzilla were at TPF this year. Glad I got on the waiting list for the Atomic Godzilla a long time ago, cause this zilla is sick. I mean beautiful detail and the atomic charge up is unreal. Best mod yet for zilla pins. Can't wait for this mod to go in my premium. Excellent work gentlemen.

Ah - awesome!!! Thanks for this - it really makes it all worth it! Yeah Davey/Stumblor made it to TPF and sounds like he had an awesome time...I didn't make it, but he's doing a good job of persuading me to go next year! It does look fantastic, and this year seemed to be a special one!!

#545 11 months ago

31st Mar 2023 UPDATE
Just to let you all know, we have contacted up to number 180 on the list and all paid orders have now shipped.
We’re taking a couple of weeks break in shipping now, but I am busy making a large batch to ship immediately after that.
The target is still to reach number 300 by early/mid May, and 400 by the end of June.
Thanks again for all your amazing support!!

#546 11 months ago

please add me to the list. (extended) THANKS

#547 11 months ago

Add me for an extended please.

#548 11 months ago

Please add me to the list for an extended.

#549 11 months ago

Add me to the list please!

#550 11 months ago

Please add me to the list for extended! Thank you.

Promoted items from the Pinside Marketplace
$ 15.00
Cabinet - Other
Space Coast Pinball
Other
$ 70.00
Playfield - Other
Pin Monk
Other
$ 20.00
Playfield - Toys/Add-ons
Game Room Info Shop
Toys/Add-ons
$ 55.00
Playfield - Toys/Add-ons
Gov's Mods
Toys/Add-ons
$ 30.00
Cabinet - Decals
Inscribed Solutions
Decals
$ 15.00
Playfield - Protection
Pinhead mods
Protection
€ 95.00
Playfield - Toys/Add-ons
Pino Pinball Mods Shop
Toys/Add-ons
$ 185.00
Playfield - Toys/Add-ons
Raiden Mods
Toys/Add-ons
$ 75.00
Playfield - Toys/Add-ons
JuanSolo's modshop
Toys/Add-ons
$ 45.00
Playfield - Protection
Chrome Candy
Protection
$ 80.00
Playfield - Other
Pin Monk
Other
From: $ 649.95
Lighting - Led
Pin Stadium Pinball Mods
Led
6,500 (OBO)
Machine - For Sale
Plattsburgh, NY
From: $ 94.00
Playfield - Toys/Add-ons
Lermods
Toys/Add-ons
$ 8.00
Cabinet - Other
NO GOUGE PINBALL™
Other
$ 50.00
Tools
Performance Pinball
Tools
$ 44.99
Cabinet - Shooter Rods
Pinball Shark
Shooter rods
6,999
Machine - For Sale
Wood Dale, IL
From: $ 25.00
Cabinet - Sound/Speakers
Space Coast Pinball
Sound/Speakers
$ 15.00
Playfield - Protection
Pinhead mods
Protection
$ 114.99
Playfield - Toys/Add-ons
Lermods
Toys/Add-ons
10,500 (OBO)
Machine - For Sale
Hilton Head Island, SC
From: $ 30.00
Cabinet - Toppers
+CY Universal
Toppers
$ 19.95
Cabinet - Shooter Rods
Pinball Life
Shooter rods
$ 399.95
Lighting - Led
Pin Stadium Pinball Mods
Led
$ 12.00
Tools
Nezzy's Pinball Prints
Tools
$ 60.00
Tools
Performance Pinball
Tools
$ 125.00
Playfield - Toys/Add-ons
Diddy's Pinball Mods
Toys/Add-ons
17,000 (OBO)
Machine - For Sale
Alexandria, VA
From: $ 11.00
Hey modders!
Your shop name here
There are 1,195 posts in this topic. You are on page 11 of 24.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/godzilla-atomic-godzilla-figure-mod/page/11 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.