Houdini
American Pinball, 2017Community,
I’m stumped. My Houdini glass on the left side goes all the way up but the right does not. If I wiggle the lock down bar, I’m able to get it to fit.
Anyone experience this issue before?
Tim
B41A7B45-DAF1-4864-96FB-A17634BF4850 (resized).jpegD234E237-F9A2-46A0-AEF5-F9D07999FD9A (resized).jpegHave you tried loosening one or both side rails just slightly, to see if it will go all the way up? Would involve two bolts and a couple of screws for each. They just need to be snug, not extremely tight.
Is the glass cut straight? Is the cab itself straight? Anything blocking that channel, the glass can’t slide past?
Quoted from Sidekick74:Community,
I’m stumped. My Houdini glass on the left side goes all the way up but the right does not. If I wiggle the lock down bar, I’m able to get it to fit.
Anyone experience this issue before?
Tim
[quoted image][quoted image]
Pull that foam antil rattle strip down that is blocking the glass channel in the rear
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/glass-wont-go-all-the-way-up and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bremen, GA