I cant see anything but pure blue!

Glare Guards - https://www.cometpinball.com/products/dmd-glare-eliminators stops glare in both directions.

LTG : )

That looks like glare on the speaker panel, a glare guard will not help. What I do is aim the spots down and in, then use a little black electrical tape to hood the bulb. Worked great on my BSD with the same issue of the light on the speaker panel not the actual ColorDMD.

1D5538EA-A48B-4511-9093-3C2F791B6D62 (resized).jpeg

My solution is to remove the spotlights. There’s really no other way.

Same goes with trough led lighting strips. Any “solution” that is worse than the “problem” that doesn’t really exist needs to go.

I just went through this on a last action hero.

I have stacked two bent plastics on top of each other to make it twice as long and attached them with Velcro.

While I generally agree that lots of pins doesn't need any additional lights (pinstadiums yuck!) but as a fellow TAF owner I will agree that specific game is so darn dark it does need a few extra spotlights or it's hard to even see the ball.

I aim my spots slightly downward at the playfield and never pointing them up toward the backbox and that's enough.

The closer to the flippers the harder it is to hide.

Spotlights living toward the top of the playfield are easier to deal with without obnoxious glare.

White would look best.

Addams doesn't have spotlights. Remove the spotlights, blue LEDs and replace with white. You'll thank me.