Quoted from rx2006je:What should I start checking?
Check this fuse block, I have seen them get corroded and not make good contact. Also pull each fuse and test with an ohm meter.
aaa (resized).jpg(Topic ID: 286773)
Linked Games
-
F-14 Tomcat
Williams, 1987
Topic Gallery
You're currently viewing posts by Pinsider GRUMPY.
Click here to go back to viewing the entire thread.
Quoted from rx2006je:I thought they all were supposed to have 4 but when i got it all only had 2.
If you have led flashers in the game you only need the inner 2 resistors to be installed. Which flasher on the play field (1c-8c) doesn't work?
aaa (resized).PNGQuoted from rx2006je:The flashers that are out or not coming on are O7C
Depending on whether you have a proto game or not some of the flashers under this plastic may have been changed. Best thing is to tell what color wires are on this socket.
Quoted from rx2006je:O6C, O5C, O4C, 03C, 02C, AND 01C (ON THE BACK WALL).
There is a molex connector for all six of these flashers, check and see if it has come undone.
These are not the correct bulbs, what number do they have stamped on them?
You have an early prototype game that has been rewired to not use solenoid 7C. It has been wired like this below.
https://www.ipdb.org/files/804/Williams_1987_F_14_Tomcat_Service_Bulletin_41.pdf
Both of these bulbs are now solenoid #9 if it was wire like the service bulletin.
pasted_image (resized).pngPromoted items from Pinside Marketplace and Pinside Shops!
Vandalia, OH
You're currently viewing posts by Pinsider GRUMPY.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
