I recently bought a HUO local ghostbusters Premium from a fellow Pittsburgh pinball Facebook group member. I’ve been enjoying it in my house for about a week and played it last night then turned it off at the backboard. Today I turned it back on and it won’t boot. Fuse continuity for power supply is good and 120v service port on transformer is good. Only aftermarket backbox leds are lit (not a new installation) Boards under the Playfield have power and the main board leds show 5v 9v and 48v as hot. 24v main board led is out but this is audio and backbox documentation shows that as powered up only after boot. Indicators for node bus transmit and receive as well as communication bridge activity are all out. No dmd and start button flippers and coin door menu buttons all dead. I went over all the connections which seem to be ok. I’d appreciate any ideas to troubleshoot.
145738F5-854A-4FC3-A446-7917F5EF2C5A (resized).jpeg5D1297AA-3C83-4753-8B74-C8648E318656 (resized).jpeg79263908-1DFA-4E82-9DE9-EB23A6A612BA (resized).jpegDD9BB270-1FA6-43E6-B20C-56461B545E23 (resized).jpeg0B1F5360-A150-4BFB-8EAE-E1ABBDC87728 (resized).jpegADAC0D2E-4C49-4D34-B583-B71B845A1E41 (resized).jpeg0406E572-ACAE-42A8-806F-DDB4B9D9CA56 (resized).jpegF0037BB5-D9CE-41B7-9513-F5C17A7E3758 (resized).jpeg21C9F920-C7CE-49A5-AB7C-16C809A71BF8 (resized).jpeg