(Topic ID: 163632)

Ghostbusters Premium - Share your info

By Air_Pinball

3 years ago

Topic Stats

  • 1,815 posts
  • 246 Pinsiders participating
  • Latest reply 2 years ago by capguntrooper
  • Topic is favorited by 60 Pinsiders


Linked Games

Topic Gallery

There have been 328 images uploaded to this topic. (View topic image gallery).

IMG_5380 (resized).JPG
IMG_5378 (resized).JPG
pic5 (resized).jpg
pic7 (resized).jpg
pasted_image (resized).png
IMG_4984 (resized).JPG
IMG_5327 (resized).JPG
image (resized).jpeg
drop2 (resized).jpg
IMG_0285 (resized).JPG
IMG_0283 (resized).JPG
IMG_0284 (resized).JPG
IMG_0278 (resized).JPG
IMG_0273 (resized).JPG
IMG_0277 (resized).JPG
IMG_0270 (resized).JPG

Topic index (key posts)

3 key posts have been marked in this topic

Post #1272 Cliffs install instructions for GB Posted by Cliffy (3 years ago)

Post #1359 Photos of the Stern upgraded side rails installed Posted by SilverballNut (2 years ago)

Post #1739 details on the "mystery coils" located in the backbox Posted by chucksmith (2 years ago)

Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider 3pinballs.
Click here to go back to viewing the entire thread.

#1339 2 years ago

has anyone installed the carrot flippers? Or is the elevated center post adequate enough?

#1381 2 years ago
Quoted from hoby1:

My premium is in my van and on it's way home. Will post feedback and pics later. Fingers crossed but feel good cause it just arrived this s morning and I'm sure it will be a Churchill

Will it have a label that says Churchill? thx

3 weeks later
#1616 2 years ago

Getting My game today.

What setting did someone suggest for the ball trough kick out to be set at instead of the max setting?

Also, can I adjust the brightness level of the those bright A$$ flashers on top of the playfield or even adjust all of the lights on the game?


#1619 2 years ago
Quoted from vireland:

There's a flasher power "low" option in the setup. Unfortunately, I don't think there's an option like JJP has for 4 or 5 levels of insert brightness. All you get is retina-searing mode for the inserts.

Thanks. Set my new game up last night and it still has 1.05 installed. Wonder why they didn't install 1.11

#1626 2 years ago

Played about 5 games and a lot of airballs. I also moved the outlanes up an 1/8 of an inch. They were flush with playfield underneath.

Put mylar about both Scoleri bros and also where the ball feeds the trough.

Adjusted the flashers to Dim, instead of bright and that helps a little bit, but the lights underneath the inserts can be blinding which I hate. JJP's don't blind me and that's where Stern went Cheap instead of using RGB's

The gripe I have is the reflection from the backglass. You can't see the upper part of the playfield that clearly. Wish they would have put invisiglass on games.

Now has anyone put PDI or invisiglass on their game and does it help a lot? I imagine it would but hate the $300 price tag on the glass, wish there was a better low cost option.

#1627 2 years ago

Correction - I also moved the outlanes up an 1/8 of an inch. They were flush with playfield underneath before I made the adjustment.

Have game set at 6.6 degrees.

One thing is that this game is light. I have A penguin dolly and have to stand with both feet to lift all my games, but could use one leg to lift GB. They really stripped the weight out of this thing.

Promoted items from the Pinside Marketplace
$ 99.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 26.00
Playfield - Other
Pin Monk
Machine - Wanted
Kutztown, PA
$ 25.00
Cabinet - Other
Pin Monk
$ 49.95

You're currently viewing posts by Pinsider 3pinballs.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside