Just finished my updated containment unit. See the link below for more pics.
https://pinside.com/pinball/forum/topic/ghostbusters-containment-unit-upgrade#post-3411117
You're currently viewing posts by Pinsider Aquapin.
Click here to go back to viewing the entire thread.
Just finished my updated containment unit. See the link below for more pics.
https://pinside.com/pinball/forum/topic/ghostbusters-containment-unit-upgrade#post-3411117
So I added the modeled library as the flat plastic felt too open in that area. Problem is that the Pro plastic is a different screening than the Premium. Instead of leaving a blindfolded Sigourney I made another decal to cover it.
For those wondering how to add the library, it is quite easy. I made to slits in the bottom of the new library to slide over the existing L brackets from the old library plastic. I also drilled two small holes in the back to allow it to be screwed in from the back. I covered the screw heads with electrical tape so they won't scratch the cabinet.
Quoted from Ballypin:Cool. I did the same thing and added the molded library to my pro. Can I hit you up for a decal ?
Looks like you swapped the spot light too.
I can send you the PDF if you want to print your own. Just send me a PM with your email address. I printed mine at Staples.
Still playing around with it, but currently have a Matrix light from Comet pinball to brighten up the library/plastic. I took the original spotlight and put it under the playfield and it illuminates the scoop.
You're currently viewing posts by Pinsider Aquapin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-mod-index-all-modders-add-your-products?tu=Aquapin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.