Quoted from beatmaster:check this out guys.
this is the best solution, not the same but for the price, i mean c'mon $11 can't go wrong. it already have lights, just hook it up to any G.I or Lamp
amazon.com link »
Looks kinda big.
Quoted from beatmaster:check this out guys.
this is the best solution, not the same but for the price, i mean c'mon $11 can't go wrong. it already have lights, just hook it up to any G.I or Lamp
amazon.com link »
Just be aware that that's the proton pack from the reboot that's coming out in two months. The best 84 pack you'll find is on the 12 inch Mattel line. The 12 inch line also has a trap, ecto goggles, and PKE meter with some of the figures.
Quoted from AtTheArcade:Just be aware that that's the proton pack from the reboot that's coming out in two months. The best 84 pack you'll find is on the 12 inch Mattel line. The 12 inch line also has a trap, ecto goggles, and PKE meter with some of the figures.
nice to know, thanks for the infos.
Cool lighting mod.
Unfortunately some gb machines are going to look abysmal after flooding their pf,s with toys n crap. Each to their own I guess.
Quoted from John1210:Cool lighting mod.
Unfortunately some gb machines are going to look abysmal after flooding their pf,s with toys n crap. Each to their own I guess.
Luckily you won't be forced to go into THEIR gamerooms to be disappointed....
*insert eyeball emoticon*
Quoted from GAP:Here's my Stat puff lit mod
What about the RGB light already in there?
Quoted from pinballnut3:What about the RGB light already in there?
Looks to me like he put leds on the outside, look at the shadows on his face. You ever put a flashlight under your face to look spooky?
installed today my ecto car mod, the lights always on, so it give a cool effect when the other lights were out.
Quoted from sirlonzelot:installed today my ecto car mod, the lights always on, so it give a cool effect when the other lights were out.
» YouTube video
Just an Idea. A foot pedal that can work during special modes, or video modes to "catch" ghosts..
And when you press it the bottom of the cab uses a cheap small cheap LED projector and wide diffusion lens and LED Projectors/Flashers to put on a quick Ghost Trap Open and Close light-show.
Crappy PS mockups included.
I also put the bolt on replacement pluger to GB wand swap.
the best GB mod you can do is the one which prevent ball to jump over these fu..outlane metal guide.
no one at Stern has tested this pin before selling it?
Quoted from sirlonzelot:installed today my ecto car mod, the lights always on, so it give a cool effect when the other lights were out.
» YouTube video
How did you hook up the lighting ?
Quoted from colonel_caverne:the best GB mod you can do is the one which prevent ball to jump over these fu..outlane metal guide.
no one at Stern has tested this pin before selling it?
Mezel is coming up with a plastic protector that will fix that problem. I will be coming up with my own design as well. No worries my friend.
Quoted from modfather:Mezel is coming up with a plastic protector that will fix that problem. I will be coming up with my own design as well. No worries my friend.
Interested with what you come up with Charlie.
Quoted from modfather:Mezel is coming up with a plastic protector that will fix that problem. I will be coming up with my own design as well. No worries my friend.
Except if the ball jumps and would land in the inlane it will now drain.
Quoted from colonel_caverne:the best GB mod you can do is the one which prevent ball to jump over these fu..outlane metal guide.
no one at Stern has tested this pin before selling it?
There's already a clear plastic set in the marketplace here for that.
Quoted from Syco54645:Except if the ball jumps and would land in the inlane it will now drain.
I am hoping someone can make some decent guide extenders that don't just cover the entire area in plastic. I realize it is just rough but the current images on ulkestore are pretty ugly and should probably just line up with the bottom lane guide plastic. I am sure they are very functional though.
(I realize you can pull the guides some but the table I saw this done on it kind of messed up the playfield as there isn't much to pull.)
Quoted from modfather:How did you hook up the lighting ?
One pair of the front leds goes to the bumper falsher the rest to 12v that you can find on the board near the coin door.
Quoted from PinMonk:There's already a clear plastic set in the marketplace here for that.
Stern ought to offer this kit for each pin.
Quoted from modfather:Mezel is coming up with a plastic protector that will fix that problem. I will be coming up with my own design as well. No worries my friend.
+1
Plan on designing/cnc machine my own version as well.
Quoted from indypinhead:+1
Plan on designing/cnc machine my own version as well.
That one place is selling them for $50 a pair!! $50 for 2 pieces of clear plastic, can you believe it.
Quoted from MustangPaul:That one place is selling them for $50 a pair!! $50 for 2 pieces of clear plastic, can you believe it.
Yeah...I know.
And made from acrylic, if I remember correctly.....doh!
And they look like they were cut on a band saw....LOL
Mine will be MUCH sweeter than that.
Problem is....I have to wait for my LE to arrive in order to make them.
What Ulek store is doing is just shitty..$50.00 for 2 clear plastics??? I will make these as soon as our game arrives for $15.00 if anyone wants them. They will be made from PETG and will have flamed polished edges.
Quoted from Laseriffic:What Ulek store is doing is just shitty..$50.00 for 2 clear plastics??? I will make these as soon as our game arrives for $15.00 if anyone wants them. They will be made from PETG and will have flamed polished edges.
And hopefully designed a bit better than those....
Quoted from Laseriffic:What Ulek store is doing is just shitty..$50.00 for 2 clear plastics??? I will make these as soon as our game arrives for $15.00 if anyone wants them. They will be made from PETG and will have flamed polished edges.
Yeah, but the list price is $65...so $49.95 is a bargain! That's a $15.05 savings!!! That makes it less than $50!!!
Quoted from sirlonzelot:One pair of the front leds goes to the bumper falsher the rest to 12v that you can find on the board near the coin door.
It would be great if you could provide a little guide on how you constructed this mod - or at lease some "underbelly" shots so we can figure it out?? I know this is a hassle but your Pinside Karma will go to infinity
Quoted from DugFreez:Yeah, but the list price is $65...so $49.95 is a bargain! That's a $15.05 savings!!! That makes it less than $50!!!
Oh and don't forget, they're offering a $5 Pinsider discount......so that brings it down to $44.95. Much better.
Quoted from colonel_caverne:the best GB mod you can do is the one which prevent ball to jump over these fu..outlane metal guide.
no one at Stern has tested this pin before selling it?
isn't the problem the fact that the outlane wire forms aren't as high as in previous games (the top of the wire form is below the center of the ball). wouldn't simply raising or producing a wire form that sits up a little higher, reduce a majority of the ball hops that are occurring?
Quoted from sirlonzelot:I got my topper today, swings really nice. I like it
Great looking topper.
Did you buy it this way, or did you have to add the lighting?
Quoted from j_m_:omg, is that actually a sticker? let me guess, $49.99?
maybe, i'll say closer to $69.99, if not more.
it does look like a printed sticker on a plastic ball. worth about $5.
looks cheap and lazy.
Quoted from beatmaster:maybe, i'll say closer to $69.99, if not more.
it does look like a printed sticker on a plastic ball. worth about $5.
looks cheap and lazy.
I wouldn't even give ya 5 bucks for that. FUGLY.
Quoted from indypinhead:Great looking topper.
Did you buy it this way, or did you have to add the lighting?
You have to add the topper plate from swinks
Quoted from sirlonzelot:You have to add the topper plate from swinks
nice work with adding the mouth lighting
Quoted from indypinhead:Great looking topper.
Did you buy it this way, or did you have to add the lighting?
slimer is this one, which has a bobble feature
http://www.ebay.com.au/sch/i.html?_from=R40&_sacat=0&_nkw=slimer%20ikon%20slimer&rt=nc&LH_PrefLoc=2&_trksid=p2045573.m1684
base from here
https://www.shapeways.com/search?q=swinksgb&type=
then just 1 x 20 and 1 x 10 led strip in the hidden recess of the base
see post 7 in this thread
https://pinside.com/pinball/forum/topic/ghostbusters-mod-index-all-modders-add-your-products
Can somebody out there come up with some cool looking burning decals to add to Stay Puff Marshmallow man...make him look crispy in some spots????
Quoted from kidchrisso:Can somebody out there come up with some cool looking burning decals to add to Stay Puff Marshmallow man...make him look crispy in some spots????
just take himout of the game and hit him with a blow torch with a light toasting
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-mod-index-all-modders-add-your-products/page/7 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.