Ghostbusters (LE)
Stern, 2016
Ghostbusters (Premium)
Stern, 2016
Ghostbusters (Pro)
Stern, 2016You're currently viewing posts by Pinsider timmmmyboy.
Click here to go back to viewing the entire thread.
After my furthest haul to date (drove from northern VA to Knoxville and back all in one day) I'm now a part of the club thanks to a gorgeous LE from VolunteerPin. Very excited for this, we'll be putting it on location here but we won't be open until May so for now I get to play test it
.
Having an issue with a handful of switches that have all stopped registering: Ghost target, left ramp, captive ball, etc. They all seem to be tied to CN12 on node board 9 but I've reseated with no change. I've checked each switch and I'm not seeing any wires loose. Wondering what I'm missing and what the best way to troubleshoot this would be, right now it seems like a needle in a haystack.
Quoted from Schwaggs:CN12 has several switch inputs that are all active low. CN12 Pin 10 is ground and is most likely connected to one side of each switch. Make sure that ground signal is making to to the switches so that when they close, they register. If that ground wire is broken or has a bad connection, none of those switches will work.
This was a huge help and found the broken ground wire. Thanks!
IMG_2519 (resized).jpegQuoted from eyeamred2u:Wow, how did ya miss that broken.
It was tucked into the harness pretty well and since it was on a switch that would normally have 2 grounds daisy chained I took a pass at it and said "nope, not missing a wire". Checking continuity between everything was what led me to look closer for a broken wire.
Quoted from mrm_4:That’s gotta be a huge relief!
When I'm working on a pin I hate pinball, when I find a fix like that I love it again. Haha, huge relief!
You're currently viewing posts by Pinsider timmmmyboy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-club-we-got-one?tu=timmmmyboy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fredericksburg, VA