Finally got my Pro last week after the first one arrived damaged at the beginning of August. It has a play field date of July 21st. I didn't look at the game build date. It has the new Slimer mech as well as the fix for the bending rail on the captive ball. The first one also had wrap around side art but this one is separate stickers for the sides and the front. Played about 60 games so far and no play field problems. Everything worked great right out of the box. It's a tough game but I'm really liking it. More so than any other pin I've gotten in recent years. That's it just my 2 cents...

Here is a pic of the damaged Pro with the wrap around art. Maybe I was lucky it was damaged as it could have been one off of the original run?

0812161849 (resized).jpg

If I recall there was now wrap around. I will double check it tonight and report back.

Here is a pic of the new side stickers. No wrap around.

0919161725 (resized).jpg

I put the clear silicone rings on my Pro. It took about 3 hours. I had to take off the ramp to do it. You also have to take off Slimer which was kind of a pain. There is a nylon spacer on one of the pivots that fell off and it took me a while to sort out where it came from. Other than that I just did it a section at a time. It also let me get some wax into areas that you normally couldn't If you've shopped pinballs before it's not that big a deal. Just take your time..

On the left side of the front pin in the bracket. I took pics before I started but had to put them on the PC to see them clearly. Looking at them on the phone wasn't cutting it. See pic...

0918161126 (resized).jpg

I replaced all my rubbers also with the clear translucent ones. It was a while ago. You have to remove Slimer to replace that rubber. If I recall correctly you have to remove the 'c' clips on the pivot point of Slimer so that you can take him off. Be careful of the little spacers on the pivot pin. They fell off and I had some trouble figuring out how they went on reassembly. Take some good pictures