Not bad, I got to 5B on my first ball and then it's a points fest I was hitting pke for 463M and with 6x playfield. I finished on 16Billion.
You're currently viewing posts by Pinsider epotech.
Click here to go back to viewing the entire thread.
Not bad, I got to 5B on my first ball and then it's a points fest I was hitting pke for 463M and with 6x playfield. I finished on 16Billion.
Quoted from Zora:These scores are crazy. Interesting that some comments state that they do not know how they got there. My high score is something in the 10B and the following is about 5B.
To be honest this shows that the scoring urgently needs some polish. The huge scores depend on the playfield multipliers to be available in the right moment. And thus you need luck to hit the K lane. It is not fun for me to have such a dependency of the scoring from the skill shoot in K.
I hope that the code update adjusts the scoring back to the basics: good shots/long play leads to high scoring.
light them at the captive ball. It deffo needs looking at when you're at 10B and the 10% of your score is lit at the skillshot...
Quoted from miga:Vireland
I‘m using an older color dmd with GB v1.30b with the 64mb rom.
These boards need 12v for the screen and 5v for the board.
(the new boards only need 12v)
I can get 12v from the bottom right hand side in the back box. Do you or anyone else for that matter know where best getting the 5v from to power the board om the color dmd?
Just done this, +5V from the red wire that usually plugs into the DMD, 12V pin3 and GND pin 1 on j6(?) on the power distrib board you're already getting 12V from.
You're currently viewing posts by Pinsider epotech.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-club-we-got-one?tu=epotech and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.