(Topic ID: 158155)

Ghostbusters Club - We Got One!!!


By 30FathomDave

3 years ago



Topic Stats

  • 6,746 posts
  • 590 Pinsiders participating
  • Latest reply 2 days ago by dnaman
  • Topic is favorited by 216 Pinsiders

You

Linked Games

Topic Gallery

There have been 1,236 images uploaded to this topic. (View topic image gallery).

fb75512b07521cd316c2b14aacb088b80e59c69d.jpeg (resized).jpg
D502B61B-8C5A-4C18-8492-E43816160EEB (resized).jpeg
pasted_image (resized).jpeg
Eager Beaver Flipper Gap (resized).PNG
68661078_2171231719835341_5055202517713944576_n (resized).jpg
68661078_2171231719835341_5055202517713944576_n (1) (resized).jpg
68554859_2179226062204796_3822761377248837632_n (resized).jpg
68481352_652995345187470_1385058336562479104_n (resized).jpg
68334674_1172135742972504_107662039698112512_n (resized).jpg
67942587_892955034432257_8397604951462772736_n (resized).jpg
67755179_512797486204088_9110689828927700992_n (resized).jpg
67755179_512797486204088_9110689828927700992_n (1) (resized).jpg
67738424_571631006921218_7467873707315167232_n (resized).jpg
67697816_2364288957171413_4937338118211633152_n (resized).jpg
68697912_716705598773104_4185599424140935168_n (resized).jpg
68360822_431834370876240_680988698531069952_n (resized).jpg

Topic index (key posts)

3 key posts have been marked in this topic

Post #4105 Link to replacement auto plunge spring that improves launch for some. Posted by Spelunk71 (1 year ago)

Post #4120 Shorter Hex Spacer to make left short easier. Posted by Blakester (1 year ago)

Post #4129 Custom target brackets that help eliminate airballs. Posted by swinks (1 year ago)


Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider cpr9999.
Click here to go back to viewing the entire thread.

#3178 2 years ago

I noticed on my GBLE that the Public Library has a black post installed on the right side when looking at the front. Also, there is a hole drilled in back to put the nut on the bolt that holds the black post.

What was - is this post supposed to be used for - odd to be there by itself.

thx.

library (resized).jpg

#3179 2 years ago

Also... question - what voltage are the little flasher boards (520-6785-00): are these 12 VDC? 12 VAC?

Also, what is the little GI boards (520-5307-00): are these 5 VDC or 5 VAC?

thx!

1 month later
#3391 2 years ago
Quoted from Delta9:

Making my own 19$ beats 6999 gawd dam

Did the same thing a few months ago.

FYI, instead of putting individual LED's in...I took apart a 555 green led and used the circuit board inside and then glued that in the back (which is mostly flat). Worked well.

#3419 2 years ago

Plastic protectors for sale.
PM me if interested - selling some extras I made and no longer need. Peel off film and install plastic.
https://pinside.com/pinball/forum/topic/ghostbusters-air-ball-protector-right-gate-orbit-prote

pic5 (resized).jpgpic7 (resized).jpg

Added 21 months ago: https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

1 week later
#3463 2 years ago
Quoted from 30FathomDave:

No, I think we're fine. Mine was snapped by the weirdest airball I've ever seen. I dont think I could reproduce it if you gave me 1000 tries.

Do you know where it hit? (right side?) Did it hit Stay Puft and then the bracket snapped at the pivot point - this is 3D printed looks like. It does not look like a ball will fit in there?

#3464 2 years ago

I can make this protector with a "U shape" extension to the plastic protector.
Although I need to check ball launch - might interfere.

I also purchased Stay Puft mod - will look this weekend.

pic5 - Copy (2) (resized).jpg

#3468 2 years ago
Quoted from 30FathomDave:

It hit all the way up by his head (and it hit HARD)! Like I said, craziest airball I've ever had on the game... or any game, for that matter. It figures it would happen only AFTER installing this awesome mod. The break happened at the pivot point. Here's a pic:

I don't want to cause any undue panic. I really do feel this was a freak thing that no one else is likely to encounter. My advice: install it and enjoy.
Since my Krazy Glue session yesterday, it's still holding up and working great.

OK, got it - does not sound like we could have prevented it (plastic protected that)!

However, looking at mine, that is the weak part of the pivot mechanism. It should be twice as thick plastic in this area.
I am sure Stay Puft can operate forever under normal conditions with this mechanical pivot mechanism design.
However, if it is SIDE loaded (say with a ball hit on Stay Puft - this is where stress can break that joint). Time will tell if this is an issue as others will hit Stay Puft in other areas.

Thanks for posting.

#3469 2 years ago
Quoted from MustangPaul:

That should be twice as thick if you ask me. I wonder why they made it so thin.

Agree - we were posting at the same time - twice as thick.

1 week later
#3523 2 years ago

Air ball protector.
Few sets left, PM me if interested. Check out video in the link below as well as details on the plastics.
https://pinside.com/pinball/forum/topic/ghostbusters-air-ball-protector-right-gate-orbit-prote

pic7 (resized).jpgpic5 (resized).jpg

Added 21 months ago: https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

#3580 2 years ago

Hey folks- copied design from pinside guy who came up with new variation. Additionally, I have one that came with my machine (not sure if it was Arts but looks like it). It is for sale.

I was getting ball stuck and some airballs, so I recreated someone else's design which works. See pictures below, note the areas in pink to see the 2 different designs.

I am sure every design can be tweaked to make it better. Also sounds like Art is good guy.

Lastly I have a few left of the new design for sale on pinside Mods page and will probably not make a 3rd run.

IMG_3953 (resized).JPG

IMG_3951 (resized).JPG

#3582 2 years ago
Quoted from OLDPINGUY:

Yup, Yours will work better, but a year ago, alt designs were soft "veto'd", when I made about 8 different protos.
The one you have for sale, with the engraving, is from Little Shop of Games.
There are a few subtle, but distinct differences.

Thanks Art. I was not sure where it came from.

1 week later
1 month later
2 weeks later
#3894 1 year ago

https://pinside.com/pinball/forum/topic/ghostbusters-air-ball-protector-right-gate-orbit-prote
Thinking about make another run.
Go to link above and add your name. Thx. Also, watch video in the link above.

pic5 - Copy (resized).jpgpic7 - Copy (resized).jpg

Added 21 months ago: https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

2 weeks later
#4004 1 year ago

Check out mods page on pinside for ordering a right orbit protector. It works with Stay Puft Mezel mod.


Added 22 months ago: Few protectors left. Ramp and right orbit.
https://pinside.com/pinball/forum/topic/ghostbusters-air-ball-protector-right-gate-orbit-prote

Added 21 months ago: https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

2 weeks later
3 weeks later
#4137 1 year ago

Few left - then they are ALL GONE folks - no more remakes!
Right orbit protector and ramp protector.

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

pic7 (resized).jpg
pic5 - Copy (resized).jpg

1 month later
#4401 1 year ago

Right Orbit protector - by Stay Puft.

#4408 1 year ago

Right orbit and left ramp airball protectors back in stock based on requests

Let me know if you need either.

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

2 weeks later
#4619 1 year ago

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

Have a few left in stock: left ramp airball protector....and right orbit protector.

pic5 (resized).jpg

pic7 (resized).jpg

3 weeks later
#4696 1 year ago

Here’s a picture in action of creating both protectors.

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector

62F4FBA2-3480-4485-A08C-3D5EEE37EE93 (resized).jpeg

#4698 1 year ago

Selling a new Stern set of Art Blades.

See add, won’t last long!

https://pinside.com/pinball/forum/topic/new-stern-ghostbusters-art-blades

EEEFFF2B-0869-4695-831A-2D29E26B4B37 (resized).jpeg

#4707 1 year ago

Stern Art Blades for sale - new. Got them 2 months ago and never installed and no longer need.
https://pinside.com/pinball/forum/topic/new-stern-ghostbusters-art-blades
4580C3C4-B2FA-4048-9F5A-23EE1B7B5772 (resized).jpeg

Added 17 months ago:
SOLD!

#4731 1 year ago
Quoted from cnuts13:

Anyone install the cliffy protectors for the brothers? I noticed the lift the ball and cause air balls . Is ther anothr way to protect those 2 areas?

Mylar would probably be your easiest option.

#4744 1 year ago
1 month later
#4792 1 year ago

Sale - buy one get one! First time sale ever. Get both protectors!

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector-1

C05B3906-EF2F-40AF-BDD5-4822C5C30FD2 (resized).png

2 weeks later
#4831 1 year ago

Check these out - sold over 100+ - watch comparison video. (On sale right now - good timing).

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector-1

Left airball protector and right orbit protector.

F6958257-F01D-4C92-B3CF-6247C5EFC0FF (resized).png
91C3D679-A2E0-484F-B1E0-A52D993F667A (resized).png
7BE9A82E-E484-4399-99ED-2C783E1BC88F (resized).png

#4846 1 year ago

I Need guidance- I read on pinside somewhere that on the left VUK people are putting a piece of something in there so the ball kicks out reliably to the right flipper.

So what material, where is it placed and can someone post a picture.
Thanks in advance!!

#4850 1 year ago

Another question. I have adjusted the springs on the drop targets understanding that a stronger spring gets the drop target out of the way quicker and causes less airballs.

Well I have tried both stronger spring tension and then back to regular strength and this really does not seem to fix the issue.

Have others seen a big reduction in airballs especially on the left drop target by adjusting spring tension?

Thx

#4852 1 year ago

Right orbit protector.

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector-1

Also there is an adjustment to the gates as well on the GB threads - search that change.

#4861 1 year ago
Quoted from Psw757:

I know several recommend adjusting power or using the foam but on mine I simply loosened the bolts holding the scoop in place underneath and turned the scoop ever so slightly and tightened it back up and it's been working fine ever since. Only need to turn it literally a mm or two.

Will try this, adjusting power did not work so it is an alignment issue. Try your method first and then if needed add foam on left side.

#4872 1 year ago
Quoted from Psw757:

I know several recommend adjusting power or using the foam but on mine I simply loosened the bolts holding the scoop in place underneath and turned the scoop ever so slightly and tightened it back up and it's been working fine ever since. Only need to turn it literally a mm or two.

Reporting back - this worked.

With that said it was a pain to adjust the 2 screws from the top and the one from the bottom. Also, to get to the top 2 machine screws you have to pull the plastic off - big pain.

Now that it is done- no foam needed or power adjustment.

The real question is will it hold up over time. If not, foam will be next in line to try.

#4873 1 year ago

Repost - need some guidance.

I have adjusted the springs on the drop targets understanding that a stronger spring gets the drop target out of the way quicker and causes less airballs.

Well I have tried both (a) stronger springs (from PinballLife) and (b) reinstalling original springs and shortening them up to 20-25 revolutions.

Neither have worked. When the left target is up and I hit it dead on with the right flipper- always get an airball directly back at me ...then the airball hits the wire guide ramp (the one that crosses the playfield) and drops back onto the playfield.

Any other ideas? Anyone put washers underneath the 2 of the 4 screws holding the Drop target to give it a pitch? Does this work?

Thx

#4875 1 year ago
Quoted from Who-Dey:

Thats strange. I just shortened my stock springs and they drop easy right now, matter of fact the one on the right droos too easy so i need to work on that one some more. I've seriously considered just disabling them anyway because i dont think they add any value what so ever to the gamr, matter of fact i hate them.

My targets have to problem dropping or resetting with any of the springs. So that’s cool.
However, no matter the spring the left drop target (with direct hit) causes an airball to hit the wire guide-ramp.

Added 15 months ago: That should say no problem dropping

#4906 1 year ago

Send code updates to Stern-thx

1 week later
#4952 1 year ago

Ghostbusters left ramp airball protector and right orbit protector.

https://pinside.com/pinball/forum/topic/ghostbusters-airball-air-ball-right-orbit-protector-1
194D5174-599C-4A0F-99CD-263D38C3CB77 (resized).jpeg513BD866-7FCD-4BE0-AD31-D569C729E6F0 (resized).png551A1319-F4B4-4F36-8E27-39C0245B462C (resized).png93F30682-1235-4E73-8988-1AB346FEEC28 (resized).png

#4969 1 year ago
Quoted from ScottyC:

If you notice in this pic (sorry not the best pic) the right orbit ball guide is a tad higher than the launch guide and the ball is hitting that and launching into Stay Puft or not transitioning smoothly into the right orbit. The very end tab of the launch ball guide is slid under the right orbit guide and is right up against the top side so there's no way raise that portion up. Should I grind down the orbit guide a bit? Perhaps use some mylar on the top of the ball guide ramp and drape it over the oribit guide?

I would check the ball guide - is the bottom flush with the playfield- tighten the bolts from underneath and any screws on the top of the playfield holding the ball guide flush with the playfield.

If this is the case - then maybe the ramp is not centered or is the wrong height. You should not have to grind or put Mylar down.

#5015 1 year ago

Looks good.
Mother machines that had ghosting were really bad.

#5023 1 year ago
Quoted from Utesichiban:

Thank you everyone. My eye doesn't even catch those things.
If there is small ghosting at the super jackpot insert and add-a-ball parts, any chance this will get worse over time? Should I ask him how many plays are on it? What I don't want to do is the buy the thing, have it worsen over time, and I end up stuck with something I'm not going to be able to sell without taking a huge hit down the road if I decide to sell for something else.
I don't expect for it to appreciate or even necessarily break even but I don't want the value to go in half .

If the machine has over 1000 plays and is over 1 year plus I would not worry about it.

#5032 1 year ago
Quoted from Utesichiban:

So is the concensus or in some cases is it small and doesn't worsen?

Small little ghosting imperfections will not grow on a seasoned game (over 1000 plays).

If it were new, then I would state different.

3 weeks later
#5089 1 year ago

Few left ramp airball and right orbit protectors left!

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors

A0812D6F-1729-49AB-B9DC-BB24F792AA9E (resized).pngEB1D4DF4-0282-4827-8E96-D968EF5B74CC (resized).pngFE8CFEBF-9E40-4584-9D66-CCD8BFFC0B3A (resized).png
4 weeks later
#5132 1 year ago
Quoted from vireland:

If you use the Shapeways angled brackets you don't need airball protectors at the targets at all.

I have found if you raise the rubber on the flippers very near the top - say within 1-2 millimeters this significantly cuts down air balls on all games!

#5138 1 year ago
Quoted from Psw757:

Yep - the Gozer flier I’ve seen but the other day I had one rocket straight back at me hit the glass and landed behind the flippers.
Craziest airball I’ve seen on any machine ever!
I agree the protectors aren’t great looking but I can’t stand the fliers, bad for play and not good for the machine.

Agree.

Cheap protection.

1 month later
2 weeks later
#5313 11 months ago
Quoted from vireland:

If you put the plastic set over the slings/outlanes, you have zero outlane jumps. Well worth the effort.
The replacement brackets are thicker than the originals and have held up very well on a route where the premium gets a lot of play, so you should be very happy with them.

Why not bump the outlines higher from the underside of the playfield - then you can have no protectors.

#5315 11 months ago
Quoted from vireland:

That reduces the jumps, but does not eliminate them on a well-waxed playfield. Plastic over the top eliminates them 100%.

Like the air balls on the 2x and 3x shots! Airball protectors eliminates them 100%

LOL

#5317 11 months ago
Quoted from vireland:

Do I really need to explain to you that a lane hop to OUT/ball OVER is much more critical than the occasional airball with the angled brackets? So yeah, angled brackets for the 2/3x area are the best solution there, and plastic over the lane guides are the best solution for that area.

Do I really need to explain to you that to protect your playfield 100% from being beat up on long 2x/3x shots that plastic airball protectors are better! One might even argue this protectors keep the ball in play 100% of the time vs angles brackets.

If your point is that angles brackets get you 90% of no air balls on 2x/3x and get rid of ugly plastic protectors then the same applies for the outlanes. Raise the outlanes up to get rid of 95% or more lane hops while getting rid of the ugly plastics!

4 weeks later
#5413 10 months ago
Quoted from NeilMcRae:

George Gomez confirmed GB code is delayed but that they are committed to it. Suspect it’s a next year update.

He did speak about this at Expo, video posted in Deadpool forum. Last part of video he talks about several code updates.

https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all/page/19#post-4652771

He talks a bit about GB delayed until next year - maybe summer!

#5440 10 months ago
Quoted from PanzerFreak:

The good news is that we know an update is coming and have Gomez on record saying what is missing from the game. Those items need to be added. There's no excuse for it if they don't. If Stern doesn't properly complete the games code then for me Ghostbusters is the last new game I'll ever buy from them. Such an iconic theme and loaded pin deserves to have its code finished.

Don’t you own Stern Star Wars ?

#5441 10 months ago
Quoted from NeilMcRae:

Yes it’s my video

Goooood job!

2 weeks later
#5502 9 months ago
Quoted from speederice:

Joining the club shortly (just waiting on it to ship). Is there an index or key post of must-have mods that I should seek out first? I know ColorDMD is on the list now....

For Premium/LE (most apply to Pro):

Install cliffy's

Adjust height of drop targets

Adjust spring on drop targets (20-25 coils up)

Check & change balls

SLIMER butt nut - check slimer positions and butt nut

Put a washer under right ball guide (blue rubber bumper) to help playfield damage

Put mylar down - where the ball lands when shot out - shooter lane. Or install Cliffy's

Get the green spring for the manual shooter rod, and the high compression spring for the auto-launcher

Align flippers

Install the plastic air ball protector and right orbit protector (CPR9999 makes the best!)

Adjust the coil power in the service menu ADJ > G.B. > Feature Adjustment #11 - Trough Eject Power. Mine is set the lowest power 176

Check 14th street subway switch to make sure ball is changing switch state

Ball guide rod 1/4" higher - hit with hammer (behind each sling shot area - this prevents ball jumping in the drain areas)

Hex spacer 1 5/8" (or 1 3/4") - change this on the right plastic 1/2 circle ramp (this shorter hex makes it easier for ball to go up).

Added 9 months ago:

For those interested, making another run of Airball protectors. Check out Ad and videos.

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-1

#5509 9 months ago
Quoted from BentleyBear:

Thinking of changing balls.What's the best once to change them with ?

Don’t forget to was your new balls!

#5525 9 months ago

For those interested, making another run of Airball protectors. Check out Ad and videos.

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-1

44AD073C-A88F-459A-B900-2AD536C1EFCF (resized).png5088E03F-2260-4EF1-BB2E-048B5540FD5E (resized).pngEE1AD515-35D7-42A7-8F62-A36C9019DE2B (resized).png
#5529 9 months ago

Ok. I see Metallica got a code update.

I didn’t know they were on the list of machines to get an update.

Metallica got v1.8 update!!! And a good update - lots changes.

Where is GB update?

#5539 9 months ago
Quoted from PinballManiac40:

Well, Lyman was the lead on Metallica so I do not see the relationship with GB.
Dwight is the lead on SW, GB and now the Munsters.

Now you are making me think twice about Munsters with Dwight on code. It might be years before it gets updates.

Also, agree with others. They hired more coders for a reason. Hopefully some of these people can finish code.

#5542 9 months ago

*****************************

Shipping out a bunch protectors tomorrow made of Pet-g - very durable!!!

See link above if you need one!

*****************************

#5568 9 months ago

Made another run of protectors (left ramp and right orbit) based on requests from Pinsiders. Have a handful left.
Let me know if interested.

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-1

095AE783-5C70-4DE5-9D50-F0BE7C861A6D (resized).png919651BB-3C96-4BD1-9E02-DD3E0D5A5AF2 (resized).pngE5BDCB88-6607-458C-A8DE-D0026204C237 (resized).png
3 weeks later
#5647 8 months ago

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-1#post-4750794

Few left ramp and right orbit protectors left - PM if interested!

50738AC2-9156-4AE9-934E-312137A1210C (resized).png5CE911C0-3E33-4783-AF6F-AE943588C4CE (resized).png9648586C-5EDD-402A-A64F-DC29C2846422 (resized).pngC1C9AC4C-78D3-402E-B3A9-F917FD70389E (resized).png
1 week later
#5664 7 months ago
Quoted from callaway15:

Just ordered a NIB GB Premium. I think I'm going to get a mod I saw with the flipper airball plastic and overhanging center post (if you want it on there). Are there other mods that might be recommended? I did opt for a shaker, too.

For Premium/LE (most apply to Pro):

Install cliffy's

Adjust height of drop targets
Adjust spring on drop targets (20-25 coils up)

Check & change balls

SLIMER butt nut - check slimer positions and butt nut

Put a washer under right ball guide (blue rubber bumper) to help playfield damage

Put mylar down - where the ball lands when shot out - shooter lane. Or install Cliffy's

Get the green spring for the manual shooter rod, and the high compression spring for the auto-launcher

Align flippers

Install the plastic air ball protector and right orbit protector (CPR9999 makes the best!)

Adjust the coil power in the service menu ADJ > G.B. > Feature Adjustment #11 - Trough Eject Power. Mine is set the lowest power 176

Check 14th street subway switch to make sure ball is changing switch state

Ball guide rod 1/4" higher - hit with hammer (behind each sling shot area - this prevents ball jumping in the drain areas)

Hex spacer 1 5/8" (or 1 3/4") - change this on the right plastic 1/2 circle ramp (this shorter hex makes it easier for ball to go up).

For those interested, making another run of Airball protectors. Check out Ad and videos.
https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-1

#5672 7 months ago
Quoted from Supersquid:

So, after being inspired by vireland great products for IMDN and Metallica, thought I would order up some gels from Amazon and give it a try on Ghostbusters since there is nothing out there. I color coded the "Ghosts Caught" light tree in the middle. Due to the insert being frosted, the colors are not as vibrant as the picture shows, but still better than the white I think. The PKE is yellow, picture just doesn't show it very well. Chose a light purple for Mass Hysteria since there is no real color to go with it, and it looked good. Was thinking of trying the mode inserts, but my brain just couldn't figure out what colors to use. Go with a certain color scale per mode tree? I'll have to have another Stout and figure it out
[quoted image]

How does mod install from underneath playfield? Can you take some pictures?

1 week later
#5709 7 months ago

Just made another run. Left side ramp and right side orbit protectors.

Shipping on Friday, let me know.

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-1#post-4790705
448694EC-418E-4758-8F11-2E26AB74C791 (resized).png60998B9D-2FE1-46D0-8F84-3581BA3C5CA4 (resized).png3961040F-260D-4286-8AD0-983AC1F6F093 (resized).pngB3F43580-3527-458D-8F78-1C53458A375C (resized).png

#5739 7 months ago
Quoted from yzfguy:

Yep, put it on. You won't even notice it afterya get used to it. An airball will land on that screen and make you cry.

Did same and agree I don’t notice it

2 weeks later
2 weeks later
#5803 5 months ago

Few left. Almost out.

Ping me if interested.

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-1

15ACD618-35BF-4AB8-9E4A-14C88DFD855D (resized).pngE1A62196-3067-42FC-B328-364BD17EA1E8 (resized).png54A4B9C8-7482-493A-875A-832C85FEBDE3 (resized).png6BA771DF-A4F0-43DE-8AA6-49CB0286B316 (resized).png

1 week later
#5849 5 months ago
Quoted from camcamaro1991:

CPR9999,
I can't attach pics in the PM, this is the later production Sterns metal out rails. As you can see the front is not a stud, we have a short screw infact I had to remove my GB plastic just to make it fit since I didn't have a matching screw with more length.
[quoted image][quoted image][quoted image]

Looks great.

If you want the original plastic installed too just use a longer screw.

Note this is an issue with Mezel Stay Puft mod motor added. Basically the screw has to hold Stay Puft motor, plastic protector and original plastic.

10 cent screw, but not necessary if you don’t want original plastic installed.

#5851 5 months ago
Quoted from camcamaro1991:

Yeah sorry I mentioned it back then when I first ordered,about mezel mods & the new rails,
however a longer screw is only 50% of the issue, the rear stud is not long enough, unless you remove the factory plastic.

Yup. Take a peak at my sales ad again, both of these are required if you have the Mezel mod motor. Thick plastics! I have instructions posted.

I had the longer bolt information there, and now just added information based on longer screw required based on new metal rails (per your pictures). . Thx

1 week later
1 week later
#5917 5 months ago

Updating link. Few left of this run.

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-2#post-4899621

008675DF-E694-4D83-9F7F-4E3F7B5E4FE2 (resized).png4C0AB3E2-F7F1-49AF-A2A1-D846D818C2C7 (resized).png3B654531-50D3-48E1-81A2-DE0C0405A97D (resized).png
1 week later
#5995 4 months ago
Quoted from JodyG:

I have contacted them many times, and they don't care. Most i've gotten is "its on the schedule".

You should have asked what is the “schedule” ... and then asked is it really on a schedule or just a future to-do list!

#6008 4 months ago

Lasering a bunch more left ramp & right orbit protectors...let me know if interested. Thx

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-2

57251C4C-1178-4BB4-BDF1-457F4A64075E (resized).png

3 weeks later
#6057 3 months ago

Back in stock!

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-2

51911F1F-A97D-4F77-9D3C-170960A631DF (resized).jpegD55A1255-9EC2-4F1F-B2F7-84521339FACF (resized).jpeg75CFCA5E-EF88-469C-A622-46DBB13F3C8D (resized).jpeg
#6069 3 months ago
Quoted from UrethraFranklin:

I think it should have been there to begin with. I wonder how you could paint one cartoony to match.

Where did you get the train?

Thx

#6074 3 months ago
Quoted from cpr9999:

Thx
Where do you get the lights powered from? What lamp? I want to try something.

Thx

1 week later
#6158 3 months ago
Quoted from WannabeWizard:

Just traded for a GB Pro. All stock. Should I invest in a color DMD and a shaker? What other mods do people suggest? LCD DMD or LED DMD? Any suggestions will help on mods to enjoy the experience. Thanks

For Premium/LE (most apply to Pro):

Install cliffy's

Adjust height of drop targets

Adjust spring on drop targets (20-25 coils up)

Check & change balls

SLIMER butt nut - check slimer positions and butt nut

Put a washer under right ball guide (blue rubber bumper) to help playfield damage

Put mylar down in shooter lane Or install Cliffy's

Get the green spring for the manual shooter rod, and the high compression spring for the auto-launcher

Align flippers

Install the plastic air ball protector and right orbit protector (CPR9999 makes the best!)

Adjust the coil power in the service menu ADJ > G.B. > Feature Adjustment #11 - Trough Eject Power. Mine is set the lowest power 176

Check 14th street subway switch to make sure ball is changing switch state

Ball guide rod 1/4" higher - hit with hammer (behind each sling shot area - this prevents ball jumping in the drain areas)

Hex spacer 1 5/8" (or 1 3/4") - change this on the right plastic 1/2 circle ramp (this shorter hex makes it easier for ball to go up).

For those interested, making another run of Airball protectors. Check out Ad and videos.

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-2

#6174 3 months ago

Eliminate ALL those airballs with plastic protectors: (almost sold out get a set for left ramp and the right orbit shot before they are gone!!!)

https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-2
B27B14E5-C7FA-4F5E-A650-547E7C9330E9 (resized).jpegCBFBF8D1-3556-435E-A445-332593193087 (resized).jpegE3DCAB70-BC50-446E-837F-B9665D6DF3C4 (resized).jpeg

2 weeks later
#6279 82 days ago
Quoted from seenev:

Canadian Arcade deleted all comments and disabled comments, so I think we can take it as a hoax now.

Agree - hoax!

See comments on flipper gap !!

1FBD6C12-44E0-4A74-A4C9-2307E32A4D04 (resized).jpeg
#6294 81 days ago
Quoted from PanzerFreak:

From Facebook
[quoted image]

Why repost image above?

#6304 80 days ago
Quoted from TaylorVA:

Stern sent me a new cabinet to replace mine as the front side has completely split open. The recent code hoax thing is really frustrating.[quoted image]

Can you take a picture of the lock down area - did they use the latest version?

3 weeks later
#6407 59 days ago
Quoted from UrethraFranklin:

It's not bad, my friend printed it for me, and I just paypaled him $60 for the time to print it. It probably cost $10 to print but on a larger print you have to babysit it. I laser cut 4x .25" wood and clamped them together, the wood sheet was $8? at Home Depot. So all in all It cost about $75 to print. So not bad. The main cost was just to have my friend monitor the print, which is just a pain.
I am selling my Guardians of the Galaxy so I can get the same printer, it prints ABS and has a print field of 9"x9"x20" so I can print big. After that I'm gonna have some fun.
I normally hate filament printers because people never clean them up, never sand or paint them properly. This printer is such high resolution printer for ABS that all you need to do is use filler primer.
Lasering the no sign took about 5 minutes as opposed to having it 3d printer and probably taking 24 hours because its so big.

What is the printer model number?

Thx

#6409 59 days ago
Quoted from UrethraFranklin:

polyprint
http://www.polyprinter.com/polyprinter-229/
I have seen a LOT of printers out there. PLA printers can range from $200-$1200 or more, but the results are usually the same. The resolution on these printers is AMAZING and it's ABS so it's a little stronger.
The basic one is 9x9x9 which is big enough for most people. My friend and I are gonna print full suits and other crazy stuff so we're getting the 9x9x20.
Here is one of my designs we're gonna go full size on, I'm making a female Rocketeer type of character.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Quoted from UrethraFranklin:

polyprint
http://www.polyprinter.com/polyprinter-229/
I have seen a LOT of printers out there. PLA printers can range from $200-$1200 or more, but the results are usually the same. The resolution on these printers is AMAZING and it's ABS so it's a little stronger.
The basic one is 9x9x9 which is big enough for most people. My friend and I are gonna print full suits and other crazy stuff so we're getting the 9x9x20.
Here is one of my designs we're gonna go full size on, I'm making a female Rocketeer type of character.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Awesome!

I want to get a printer but unsure of model/type.

I have heard of MakerBot, Multimaker etc.

But I came across a brand called Lulzbot which looked cool - good reviews - and can do multiple materials.

Do you know anything about them?

Thx

1 week later
#6434 52 days ago
Quoted from Who-Dey:

Not trying to be a Negative Nancy Panzer but i wouldn't count on anything major at all because i just don't see it happening. The good news though is i played GB last night and it is still great fun even with the current code.

Agree Dwight has some time to add a few things.

Bad news .... probably means fewer updates for Munsters

#6435 52 days ago
Quoted from Who-Dey:

I don't wanna bet but i sure hope that you are right! Ghostbusters could easily be amazing with just a few tweaks. Its already amazing truthfully but it just needs a couple of things changed and polished up to make it one of the all time greats.
I think with a really nice code uodate that there would be a lot of people rushing out to buy this title again. I truly believe that.

Buy “used versions” - I think this is out of production?

#6437 52 days ago
Quoted from Who-Dey:

Ehh....should get another update in about 3 years I'd say. You're too impatient.

Well I own both games- can’t win them all

Both games are good as is, updates are a bonus for me!

3 weeks later
#6568 25 days ago
Quoted from delt31:

anyone here still sell the air ball protectors for the left ramp (prem)? PM if so. thanks.

New Link:
https://pinside.com/pinball/forum/topic/sale-ghostbusters-airball-air-ball-right-orbit-protectors-3

68F8A282-0DA8-4C07-9444-D2424D5B7FE2 (resized).jpeg7F6E2FCF-1948-40A2-857A-652385696E4E (resized).jpeg56753A7B-61E5-4956-A759-52D85DFB341F (resized).jpeg
#6581 23 days ago

Think of selling my GBLE. Lots mods too.
In great shape. On the fence since new code is coming out (someday)!

Not sure - thoughts on what I should do? Any interest if I sell, PM me. If I sell it will be through Pinside.

550D0BAB-0FCD-429D-B254-75197A6508DF (resized).jpeg4609B0A5-DB9F-416F-A7E3-739D673E12C7 (resized).jpeg
#6583 23 days ago
Quoted from delt31:

some really cool mods on there. where did you get the subway car and ghost in electric chair?

Make my own mods - most of the time, including these.

With that said, I think modfather carries subway car (I am sure they got off eBay too); scolary brothers were purchased off of eBay- modified and led lighted.

#6585 23 days ago

Few people asked -all these are mods on game (blue circles in picture), plus purchased Doug’s speaker lights and Mezel mods moving StayPuft.

I am sure I missed 1 or 2!

EDIT - missed plastic protectors on Ecto goggles and Right orbit...
EB8B4808-14FB-48A2-9879-763EB710B6F0 (resized).jpeg

#6586 23 days ago
Quoted from delt31:

well they look great. If you wanted to take them off and sell to me, PM me. thanks

Ok will do if I sell and depending on others thoughts.

#6593 22 days ago

Listed for sale:

Archived after 12 days
596 views
Sold elsewhere
Machine - For Sale
HUO - Documented (Home Used Only) “Up for sale is a low play Ghostbusters Limited Edition. I am in the hunt for another LE machine so this one must go. If I had unlimited cash it would stay (especially with new CODE...”
2019-08-01
Saukville, WI
7,900 (OBO)

#6660 17 days ago
Quoted from rwh143:

Ive never pealed off mylar. Do you have any suggested tools or tips for getting it off?

Dust spray like they use on keyboards.

#6672 14 days ago
Quoted from TheCnyPinGuy:

I hope everyone else’s day starts better LOL[quoted image]

Is that a broken, used rubber!!!

1 week later
#6739 6 days ago
Quoted from Coindropper:

Thanks Delt! Hope everyone likes em’. Just trying to give back.

Agree - these look great and the pinball community appreciates all of them!

Promoted items from the Pinside Marketplace
$ 22.00
Cabinet - Sound/Speakers
ModFather Pinball Mods
$ 35.00
Playfield - Toys/Add-ons
3D MODS
€ 45.00
Playfield - Toys/Add-ons
YOYOKOPTER MODS
$ 94.00
4,500
Machine - For Sale
Nanuet, NY
Trade
Machine - For Trade
Platteville, WI
From: $ 22.00
Playfield - Toys/Add-ons
ModFather Pinball Mods
From: $ 149.00
Playfield - Toys/Add-ons
Sparky Pinball

You're currently viewing posts by Pinsider cpr9999.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside