You're currently viewing posts by Pinsider Rydhia.
Click here to go back to viewing the entire thread.
The beams came from the person who designed them when they were originally supposed to be in the game. Reach him by email [email protected] They should work fine out of the box, but if you want them to be interactive, there are two wires to solder. The beams are lit on there own, I believe they’re EL wire. They plug into the 12v tap by the coin door, I think it was CN1.
The apron is a spare stranger things I had from the UV kit. The glow underneath is from the beams, I just stuck the stickers from the plastic one underneath as if it were the plastic. I was more or less testing to see if I can make it work. I either need to buy one with a curve in the middle or cut it down, might powder coat.
The storage facility is that Walter Peck toy. Cut to fit and I used a dremmel for the light boards to show through.
It’s somewhat black light, I have pinstadiums and GITD titans but don’t typically turn on full black light mode, but thought it looked kind of cool without washing out the playfield.
Quoted from Karl_Hungus:Thank you for the pic! Does your right orbit switch register correctly?
I had to bend mine a little (this was right out of the box). Do a switch test to make sure it works at all and then try making it a little higher.
Might not be the appropriate fix, but it worked for me.
You're currently viewing posts by Pinsider Rydhia.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-club-we-got-one?tu=Rydhia and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.