My Pro just arrived, sitting in the garage, now to wait 7 hours until the box opening party begins. This will be a long day!

Check the Ghostbuster issues/fix's thread. Mine was not registering at all at first. I have it working good now. It does need to be hit from the front side hits dont register.

You mean the target directly left of the ramp? If so yes. If you look at the metal flap it extends past the ramp entrance post. When a ball hit's the metal flap before striking the target it it fly into the air, as the ball is already airborne from the ramp flap. This is a VERY POOR design and probably my biggest complaint. I was able to get the flap flatter on the playfield by using a very small washer on the ramp screw.

Weird thing is in one of the videos the proto-type did not have an extended ramp flap like the one that it is shipped with.

A couple pics of my machine below, along with a screenshot of a prototype. Can you see the difference in lengths?

20160707_214839_(resized).jpg

20160707_214856_(resized).jpg

A picture from the protype GB, different ramp flap.

1_(resized).png

It appears to be an LE ramp.

I just don't get how a Pinball company that has designed pinball machines for years, can not figure out that a ramp flap that extends in front of the ramp will create air balls. Either they dont give a shit about are balls, or they are all a bunch of idiots.

I would think the design software should have a red flag in it for this reason an not allow the flap to extend past the ramp.

This is the same reason TWD Prem/LE airballs the left ramp. IDIOTS I SAY IDIOTS!