I joined the club about 2 years ago with a Premium, but I just started posting. Hello!
You're currently viewing posts by Pinsider Karl_Hungus.
Click here to go back to viewing the entire thread.
What are the opinions on Color DMD versus keeping it stock? Do the colors enhance your game or do you like it pure?
Quoted from pinballaddicted:We just put one on ours and love it. Does nothing to enhance gameplay but looks awesome! Have not played cross the streams yet.
OK. Understanding the LCD vs LED debate which did everyone choose? Any pictures to share?
I like how the LCD can still look stock from the outside, but I am battling my OCD and knowing it is not a perfect fit inside. Welcome to my warped mind.
Does anyone have a picture of the mylar on the right orbit? I have examined the area and I don't see it to remove it, but I certainly have an issue with that switch not registering. I searched the topic, but didn't turn up any pictures of it. Thanks!
Quoted from Clytor:There is no Mylar on my right orbit. [quoted image]
Thank you for the pic! Does your right orbit switch register correctly?
Quoted from Rager170:Interesting.
Anyone have a newer build that you can share pictures? Would like to see how they changed the flipper position.
Quoted from Meegis:To rotate images, you can use the tool once they show up as thumbnails (after you attach them to a post)
If you're on a mobile phone, if you touch the pic thumbnail at the bottom edge, it will show the tools. If you touch the pic anywhere but the bottom it will just open it.
Try touching the bottom edge...
Thank you! For some reason it won't rotate on my mobile, but I finally figured out the angle. Thanks again!
Quoted from ItsBwalt:Hey Guys! Got a HUO Pro a while back, good game. Having an issue though where on auto plunge (I've tried setting power lower) and sometimes on hard regular plunge the ball bricks at the top right of the game and comes either back down the shooter lane or down the staypuft lane. Problem is i just dont know what its hitting up there? Anyone else have this issue?
Lots of people. A solution that helps some is replacing the spring on the shooter. There is a link somewhere in here to the proper spring. I believe it is green.
Quoted from Luckdragon100:Dumb newbie question. Anyone know what tool I would use to tighten these black switch screws with? One keeps falling out and I've tried to tighten it by hand, and it's not seeming to get tight enough. I tried with my pliers but I couldn't get any leverage. Thanks! G
[quoted image]
If it keeps falling out, is it stripped? I would use a socket or a ratcheting screwdriver with a bolt attachment, but be careful not to overtighten, you could easily crush the plastic.
Quoted from Propsnsports:Besides not seeing anywhere it would go , it the grey post that’s throwing me off too. There no others in the game.
Dana
There is no Dana, only Zuul.
Quoted from StavrosMilos:Hey all. Having an issue with my left drop target. I installed some cliffys. Love them. But now when I shoot the ball toward the ramp it literally jumps off the cliffy and OVER the ramp. Is there a way to adjust the height of the left scoleri to make it more level with the PF?
Same issue. I lowered the target and thought it worked, but the airballs are just as bad. Interesting it is only the left side too but I don't have as many straight on shots to the right target. I'll be interested to see if you have any luck.
Quoted from Mrsiyufy:If you can post A picture of the left drop target with the cliffy installed it might be helpful. Thanks!
Quoted from rwalters21:which ColorDMD is the better option for GB premium, LCD or Led? any opinions from other owners is much appreciated. thanks, Ryan
Yes, the debate rages on, but I went with the LED to preserve the feel of the original game and to have it fit perfectly in my machine. The virtual dots just don't do it for me. LED brightness is great as well.
Quoted from mdeslaur:I just got a GB Premium to replace my Pro, and am in the process of removing a whole bunch of mods the previous owner put in the game.
Some of the lights seem to have been replaced with red bulbs, and I'm wondering if that is stock or not:
1- Three of the bulbs at the top of the backboard are red.
2- The flasher underneath the city is red.
3- The bulb right next to the ghost target is red.
The manual says all bulbs are supposed to be white, but I seem to recall the bulb next to the ghost target bring red on my Pro. Perhaps this was a last-minute change because there's nothing in front of it and it would be blinding if it was white?
Are those bulbs white or red on other premium machines?
Thanks!
The back and by the ghost target are stock. The flasher under the city is white from the factory.
Quoted from Nds777:I think I missed something. Who makes that version of the car?
Hallmark 2019 ornament.
Quoted from Pinkitten:You just squirt this solvent on the adhesive side and then position them? The solvent just dries and doesn’t harm the blades? This would be great. I use the 2-person method and while we are good at installing them, it’s still tricky.
Yep RapidTac goes on the adhesive side and on the cabinet if you want. It gives you flexibility installing the blades and dries like it was never there.
Did anyone else get the re-issued walking Sta-Puft from Mezel Mods? I'm installing mine hopefully tomorrow! Now all I will need to feel complete is @wolfcub 's firehouse.
Agree 100% on the install comments. It could also use a splitter if you have a topper and a shaker. I cut the zip tie off the Sta-Puft mount based on the "Backwards 'L'" pictures. Double sided tape would be nice as there is NO way to get that box on the nut on a Premium or LE.
Quoted from DoorCounty:What version Stay Puft do you have?
The new 2023 v2 re-release.
You're currently viewing posts by Pinsider Karl_Hungus.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-club-we-got-one?tu=Karl_Hungus and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.