Hi team,
Left scoop not registering. Switch and coil are fine in testing. Under PF inspection fine. Any ideas? Thanks
You're currently viewing posts by Pinsider DaddyManD.
Click here to go back to viewing the entire thread.
Hi team,
Left scoop not registering. Switch and coil are fine in testing. Under PF inspection fine. Any ideas? Thanks
Quoted from DirtyDeeds:Are you using the ball to test the switch rather than your finger which may push the switch down a bit further.
Did both. Ball does it in switch test without fail. Finger also works haha.
Quoted from Schwaggs:Pay close attention that the switch is staying closed as the ball sits in the scoop. I’ll bet it isn’t. The ball drops in the scoop, triggers the switch then the switch opens when the ball comes to rest. The software fires the coil, even though the switch is open as a precaution.
Almost guaranteed you need to adjust it so the switch closes further. Very common problem on that scoop.
Thanks this is helpful and will try tonight! Really appreciate it!
Quoted from Schwaggs:Pay close attention that the switch is staying closed as the ball sits in the scoop. I’ll bet it isn’t. The ball drops in the scoop, triggers the switch then the switch opens when the ball comes to rest. The software fires the coil, even though the switch is open as a precaution.
Almost guaranteed you need to adjust it so the switch closes further. Very common problem on that scoop.
You are the man! Adjusted switch with needlenose and works great again! Thanks so much!
You're currently viewing posts by Pinsider DaddyManD.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-club-we-got-one?tu=DaddyManD and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.