(Topic ID: 158155)

Ghostbusters Club - We Got One!!!

By 30FathomDave

7 years ago


Topic Heartbeat

Topic Stats

  • 12,413 posts
  • 909 Pinsiders participating
  • Latest reply 2 hours ago by MacGruber
  • Topic is favorited by 343 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

20240322_210910 (resized).jpg
f670877f3f28073daaa612ae378413f7fddfe93d (resized).jpg
f10664d447842a0f641eb8f7173ce399ac0ed964 (resized).jpg
what-icanthereyou.gif
20240310_2150382@8 (resized).jpg
IMG_5152 (resized).jpg
IMG_1987 (resized).jpeg
20240221_000830 (resized).jpg
IMG_1693 (resized).jpeg
IMG_1695 (resized).jpeg
IMG_1699 (resized).jpeg
IMG_1697 (resized).png
IMG_1698 (resized).jpeg
IMG_5065 (resized).jpg
20231210_122734 (resized).jpg
BD2CE732-C3B2-41F6-B10D-9C1350BB4027_1_105_c (resized).jpeg

Topic index (key posts)

4 key posts have been marked in this topic (Show topic index)

There are 12,413 posts in this topic. You are on page 173 of 249.
#8601 3 years ago
Quoted from embryon:

Loctite is required to simply stop it from loosening, but I'm assuming it isn't stripped

Thanks for all the suggestions! I'm pretty sure it isn't stripped. It just seems like it came loose over time / impact. I just ordered a socket set, so I'll give that a shot!

#8602 3 years ago
Quoted from embryon:

Loctite is required to simply stop it from loosening, but I'm assuming it isn't stripped

loctite but a light grade one or install the screw and then small piece of heavy duty tape to stop the bolt loosening out

#8603 3 years ago

So today I trade back the Ghostbusters Pro to my friend who had our Aerosmith Pro. Tell you what, and I'm preaching to the choir in this thread, but Ghostbusters is an incredibly fun game! I'm happy to have had a few months time on it. I tried the center post mod with stock flippers; stock flippers only; and carrot flippers only. Carrot flippers for the win with us. I had no problem with the stock flipper gap, but that's not the case for everyone else.

Ghostbusters also provided me much enjoyment with modding the soundtrack using Pinball Browser. I've modded my prior games like Mustang; X-Men; Aerosmith; Star Trek and Metallica.

This afternoon I took a video of gameplay showing the updated soundtrack I made before I packed up the game.

I updated the Mudflaps Pro soundtrack, which is excellent and a great start for me. I just do not have the appreciation for the original soundtracks of GB 1&2, just not my style of music. I prefer the entire gaming experience to be very upbeat, energetic and keeping with a Blues Brothers-Ghostbusters vibe in conjunction with the original Stern soundtrack of EDM. Here I have Tina Turner instead of Aretha like Blues Brothers. Also have Stevie Ray Vaughn; James Brown; Cherry Poppin Daddies; The Prodigy; KillParis; Ghostbuster theme remixes including an uptempo remix starting on ball 3.

If you're interested and have a DropBox account, message me your email that I can share it with. The file is 1.1gb and I don't have it uploaded to any free site yet. But I can share freely over Dropbox I think, if there is any interest at all.

https://photos.app.goo.gl/idvC6sYjrchU99Kv5

#8605 3 years ago
Quoted from TTARider:

I know what I'm getting into before I post this... I'll looking to buy a stern ecto topper.. If you have one you are wanting to sell, PM me your price.. I'm ready to believe you.

Willing to pay top dollar on this.. don’t be shy , I know someone out there wants to sell

#8606 3 years ago

I don’t know how others feel, but my absolute favorite part of this pin is “Spook Central” mode coupled with the song changes by delt31 featuring Savin’ the Day by Alessi. I find myself trying to simply get to that mode and lasting as long as possible to hear the song and the Ghostbusters cheers from the people in NYC. If I lose a ball quickly on that mode I am pretty disappointed. The fulfillment of saving all of the ghostbusters on the rare occasion I complete the mode is enough to have me keep coming back.

People are always talking about the big cool features of this pin that I also love, but even the simple things in this game are great too.

#8607 3 years ago

My slimer pooped out, anybody have any idea how to fix him?

#8608 3 years ago

Would love to join this club.
If anyone is considering leaving the club I have an offer for you.

https://pinside.com/pinball/forum/topic/for-sale-transformers-combo-premium-le-

#8609 3 years ago
Quoted from billrz:

My slimer pooped out, anybody have any idea how to fix him?

Looks like the drive belt has broken or fallen off. Drive belt is located under the playfield right under slimer. If you lift the playfield you will see what I mean.

Good luck!

#8610 3 years ago
Quoted from pinballaddicted:

Looks like the drive belt has broken or fallen off. Drive belt is located under the playfield right under slimer. If you lift the playfield you will see what I mean.
Good luck!

It’s not that. The drive belt is on, it’s extremely tight as well. Thank you fir reply tho

#8611 3 years ago
Quoted from billrz:

It’s not that. The drive belt is on, it’s extremely tight as well. Thank you fir reply tho

I think there is an Allen screw in the hole that may have come loose

EE6CB687-D270-4B83-9176-688062506EAD (resized).jpegEE6CB687-D270-4B83-9176-688062506EAD (resized).jpeg
#8612 3 years ago
Quoted from Mrsiyufy:

I think there is an Allen screw in the hole that may have come loose
[quoted image]

I will be so happy if this is the fix !! Will try on my lunch break today. Thank you

#8613 3 years ago

If that doesn’t work there is another Allen screw below the play field

A7215303-A3E2-4E2A-9BD7-154049E9C3EB (resized).jpegA7215303-A3E2-4E2A-9BD7-154049E9C3EB (resized).jpeg
#8614 3 years ago
Quoted from Mrsiyufy:

If that doesn’t work there is another Allen screw below the play field
[quoted image]

Checked, it’s not those Allan screws. Both are nice n tight. Any other ideas ??? Thank you again. I was hoping it was that .

#8615 3 years ago

I’ll check my mechanism when I get home and see if I can figure something out.

#8616 3 years ago

Check that the two bolts in the picture are tight. And there are Allen screws on both of the rods. One on each side of the belt. If I try to twist my rod it has less than a 1/2” of movement. So make sure everything that can be adjusted is snug.

3D5957E4-02CB-4234-9063-BA84C2E52052 (resized).jpeg3D5957E4-02CB-4234-9063-BA84C2E52052 (resized).jpeg8108142B-68F9-4D17-AF72-27246B482416 (resized).jpeg8108142B-68F9-4D17-AF72-27246B482416 (resized).jpegE06A52FE-D0DC-466C-BD67-357B82C45A7D (resized).jpegE06A52FE-D0DC-466C-BD67-357B82C45A7D (resized).jpeg
#8617 3 years ago
Quoted from Mrsiyufy:

Check that the two bolts in the picture are tight. And there are Allen screws on both of the rods. One on each side of the belt. If I try to twist my rod it has less than a 1/2” of movement. So make sure everything that can be adjusted is snug.
[quoted image][quoted image][quoted image]

Looks like that Alan screw is missing. Gotta search the cabinet now. Hopefully that’s the issue

448A0299-FBBD-43B9-A224-F369628748A5 (resized).jpeg448A0299-FBBD-43B9-A224-F369628748A5 (resized).jpeg
#8618 3 years ago

Found it !! Bottom of cabinet. Put it back in,tightened it up, and it’s like brand new!

00808655-60F3-4D9B-A8F2-893E24A0012D (resized).jpeg00808655-60F3-4D9B-A8F2-893E24A0012D (resized).jpeg9F3473E7-7A6D-4DA5-9C7A-1CA810053D87 (resized).jpeg9F3473E7-7A6D-4DA5-9C7A-1CA810053D87 (resized).jpeg
#8619 3 years ago

Awesome! Glad to hear it!

#8620 3 years ago

Hey all. Having an issue with my left drop target. I installed some cliffys. Love them. But now when I shoot the ball toward the ramp it literally jumps off the cliffy and OVER the ramp. Is there a way to adjust the height of the left scoleri to make it more level with the PF?

#8621 3 years ago
Quoted from StavrosMilos:

Hey all. Having an issue with my left drop target. I installed some cliffys. Love them. But now when I shoot the ball toward the ramp it literally jumps off the cliffy and OVER the ramp. Is there a way to adjust the height of the left scoleri to make it more level with the PF?

There Is a screw on the bottom of the target. You will need to lift the playfield. Tightening the screw pushes it up, loosening lowers.

#8622 3 years ago
Quoted from StavrosMilos:

Hey all. Having an issue with my left drop target. I installed some cliffys. Love them. But now when I shoot the ball toward the ramp it literally jumps off the cliffy and OVER the ramp. Is there a way to adjust the height of the left scoleri to make it more level with the PF?

I had the same issue when I installed those cliffys. There are two screws under each mechanism, one for each side to level with the playfield. Just maybe a half to 1 turn of the screws fixed the cliffy airballs.

#8623 3 years ago

I am finally in the club. Bought a ghostbusters pro about a month ago.

I was hoping someone can help me. I found this on my Playfield after raising it to plug in for my light kit. I have looked all over and have no idea where it came from. Any help at all would be appreciated , its driving me crazy.
Dana

6C71E25E-BA6E-4B12-99F8-9AE62CB953D1 (resized).jpeg6C71E25E-BA6E-4B12-99F8-9AE62CB953D1 (resized).jpeg98126941-D4A3-4121-9A52-FC9070958435 (resized).jpeg98126941-D4A3-4121-9A52-FC9070958435 (resized).jpeg
#8624 3 years ago

Besides not seeing anywhere it would go , it the grey post that’s throwing me off too. There no others in the game.
Dana

#8625 3 years ago

that post to the underside of the ramp on the rhs next to the rhs up ramp piece - stops balls getting ontop of the plastic under the ramp

mine has been off for 2 years and waiting for a break to remove the ramp

see the upside mounted post behind the hex post

screen-capture-1 (resized).pngscreen-capture-1 (resized).png
Super exclusive ad from the Pinside Marketplace!
#8626 3 years ago

Parts - For Sale
New (selling multiple) - “do you have a Ghostbusters Pro that slimer doesn't consistently register hits? just before I got rid of mine I ordered the upgraded premium mech. I paid almost $160 for it.”
2020-08-06
St. Albert, AB
120 (OBO)
Archived after: 42 days
Viewed: 290 times
Status: Sold (amount undisclosed)

#8627 3 years ago

Thanks for the help. I was losing my mind trying to find where it went.
Dana

#8628 3 years ago
Quoted from Propsnsports:

Besides not seeing anywhere it would go , it the grey post that’s throwing me off too. There no others in the game.
Dana

There is no Dana, only Zuul.

#8629 3 years ago
Quoted from StavrosMilos:

Hey all. Having an issue with my left drop target. I installed some cliffys. Love them. But now when I shoot the ball toward the ramp it literally jumps off the cliffy and OVER the ramp. Is there a way to adjust the height of the left scoleri to make it more level with the PF?

Same issue. I lowered the target and thought it worked, but the airballs are just as bad. Interesting it is only the left side too but I don't have as many straight on shots to the right target. I'll be interested to see if you have any luck.

#8630 3 years ago
Quoted from Karl_Hungus:

Same issue. I lowered the target and thought it worked, but the airballs are just as bad. Interesting it is only the left side too but I don't have as many straight on shots to the right target. I'll be interested to see if you have any luck.

If you can post A picture of the left drop target with the cliffy installed it might be helpful. Thanks!

#8631 3 years ago
Quoted from Karl_Hungus:

Same issue. I lowered the target and thought it worked, but the airballs are just as bad. Interesting it is only the left side too but I don't have as many straight on shots to the right target. I'll be interested to see if you have any luck.

I raised my target just a touch (about a half turn) so that the cliffy ledge is a little lower. My targets were previously just a touch below the playfield. Now they're pretty close to level with the playfield.

#8632 3 years ago
Quoted from StavrosMilos:

Hey all. Having an issue with my left drop target. I installed some cliffys. Love them. But now when I shoot the ball toward the ramp it literally jumps off the cliffy and OVER the ramp. Is there a way to adjust the height of the left scoleri to make it more level with the PF?

Take the cliffys off and properly level the drop target. Then, leave the cliffys off. Put Mylar on the cutout edges.

#8633 3 years ago

Hey all! Been in the club for a few months now and loving it, but want to figure out some tricks to amp up my scoring a bit. All of the strategy posts I find in a Google search are related to old code - can anyone point me to some quick and dirty tips? Thanks for the help!

#8634 3 years ago
Quoted from onemilemore:

Hey all! Been in the club for a few months now and loving it, but want to figure out some tricks to amp up my scoring a bit. All of the strategy posts I find in a Google search are related to old code - can anyone point me to some quick and dirty tips? Thanks for the help!

On new code, it seems like the left ramp is pretty crucial. You can choose that as your skill shot to start that mode. When you make that shot, you start that mode, light multipliers on the left captive ball and build your proton pack bonus. In a nutshell you can get 6X lit with alternating shots between the left ramp and left captive ball. Then you have to avoid death while shooting the standups to start 2X and 3X. Good luck.

#8635 3 years ago

Left ramp to the stand ups on the left until your arms fall off.

#8636 3 years ago

First good game in a while. 3X target was broken, slimer was broken. Fixed them both, put up this nice little score on the third game after fixing everything, this game is underrated!! Been playing a lot of tmnt before fixing GB, missed playing it

4ED43A8A-347F-4F0F-AB25-C96F137C830B (resized).jpeg4ED43A8A-347F-4F0F-AB25-C96F137C830B (resized).jpeg
#8637 3 years ago
Quoted from chuckwurt:

Left ramp to the stand ups on the left until your arms fall off.

If I screw up and miss starting a mode, this becomes my goto. 75M per "loop" is pretty good, but it can't compare to completing a ladder and getting into WCWS. It's also a lot of shots to the ramp and standups, and misses becomes risky.

#8638 3 years ago
Quoted from Mrsiyufy:

If you can post A picture of the left drop target with the cliffy installed it might be helpful. Thanks!

20200913_151239 (resized).jpg20200913_151239 (resized).jpg20200913_151248 (resized).jpg20200913_151248 (resized).jpg20200913_151303 (resized).jpg20200913_151303 (resized).jpg20200913_151326 (resized).jpg20200913_151326 (resized).jpg
#8639 3 years ago

Ended up with an extra metal apron for GB premium anyone need it? Figured some modder might want to paint it

20200913_170439 (resized).jpg20200913_170439 (resized).jpg
#8640 3 years ago
Quoted from Karl_Hungus:

[quoted image][quoted image][quoted image][quoted image]

The cliffy looks raised on the edges. You could remove it and give it a slight bend to make sure it’s straight. But If it’s not there to hide any chipping or damage I would just remove it and protect with Mylar.

#8641 3 years ago

Back in the club. I had a GB before and it was a nice one. But this one is far better. And, it has the "Holy Grail" of toppers... . My previous one was loaded with dimples, but this has almost none, under 200 games.

Here's a link to detailed pictures: https://www.icloud.com/sharedalbum/#B0rJEsNWnJtkcNo

Here's how it's equipped/modded:

‪-Stern Topper
-Color DMD‬
‪-Full cliffy protector set‬
‪-NO GHOST ACRYLICS Speaker Grill Insert‬
‪-Custom Book stacking mod‬
‪-Stern Lasercut plasma gun side rails‬
‪-Custom Ghostbuster logo Backbox Hinge set‬
‪-Speaker Light Kit 10‬
‪-GHOSTBUSTERS 3D GHOST TRAP‬
‪-ECTO GOGGLES SHIELD‬
‪-River of slime plastic pop bumper mod‬
‪-ECTO 1 Lighted Car MOD‬
‪-Arcade Keepup Dimming Backbox Kit‬
‪-TILT Graphics Sideblades‬
‪-Ghostbusters Scolari Brothers Drop Target Spring Fix Kit‬
‪-Shaker Motor Kit‬
‪-Custom Coin door magnets‬
‪-GB Keychain‬
‪-PerfectPlay Silicone Rubbers‬
‪-Flipper Fidelity Complete Stern Speaker System With 10" Woofer‬
‪-PinGuard Cabinet, Felt and nylon Leg and bolt Protectors‬
‪-Leg Leveler Rubber Castors - Set Of 4‬
‪-PinGuard SPIKE Shooter Lane Protector‬
‪-8-Way Power Splitter Board‬
‪-Metal Hex Spacer (Ramp Fix)‬
‪-BriteButtons Illuminated Flipper Button (Purple)‬
‪-Gozer Action Figure‬
‪-Pinmonk Full color LED Gels‬
‪-Die Cut Ball-Drop Protective Playfield Mylar‬
‪-Ghost Trap Flipper Bat covers‬
‪-Ghostbusters Pinball Backboard Illumination‬
‪-Ghostbusters Pinball Slimer Pinballs - Green with Pink‬
‪-Ghostbusters Pinball Scoop LED‬
‪-Swapped out to lower pressure plunger and auto launcher spring‬
‪-Extended Sling Protector with Center Post‬
-‪cp3r's Airball Protector‬
‪-Ghostbusters Mirror Replacement Mod‬
‪-Replaced with Williams/Bally heavy-duty inner Leg Bracket‬
‪-Stern Yellow flippers‬
‪-TerrorDog figures‬
‪-Ball Baron Ninja balls‬
‪-Added Stern service bulletin for the node boards‬
‪-Fixed the left flasher issue that can short out‬
‪-Custom Instruction cards‬
‪-Stern Tournament Button and Switch Assembly‬
‪-Ghostbusters Upgrade Kit - center post‬
‪-Replaced with Stern Lockdown Bar and Receiver Assembly‬
‪-Pinstadium lights kit‬
‪-Ghostbuster logo Plunger Plate‬
‪-Swinks Target Wedge - 4 Degree mod‬
‪-Stern Firehouse and sign‬
‪-Handpainted custom slimer covers‬
‪-Custom Subway car mod‬
‪-Yoyokopter pink outlane guards‬
‪-Yoyokopter ghost trap mod‬.

What do you think? Anything else to add?

088738A0-1BDD-421B-9640-826B607A1EE5 (resized).jpeg088738A0-1BDD-421B-9640-826B607A1EE5 (resized).jpeg8460B0B5-7B5E-4F21-93F9-29D634082D94 (resized).jpeg8460B0B5-7B5E-4F21-93F9-29D634082D94 (resized).jpeg847E8A37-E628-41D3-ABED-C628D7A53388 (resized).jpeg847E8A37-E628-41D3-ABED-C628D7A53388 (resized).jpeg
#8642 3 years ago
Quoted from Navystan:

Back in the club. I had a GB before and it was a nice one. But this one is far better. And, it has the "Holy Grail" of toppers... . My previous one was loaded with dimples, but this has almost none, under 200 games.
Here's a link to detailed pictures: https://www.icloud.com/sharedalbum/#B0rJEsNWnJtkcNo
Here's how it's equipped/modded:
‪-Stern Topper
-Color DMD‬
‪-Full cliffy protector set‬
‪-NO GHOST ACRYLICS Speaker Grill Insert‬
‪-Custom Book stacking mod‬
‪-Stern Lasercut plasma gun side rails‬
‪-Custom Ghostbuster logo Backbox Hinge set‬
‪-Speaker Light Kit 10‬
‪-GHOSTBUSTERS 3D GHOST TRAP‬
‪-ECTO GOGGLES SHIELD‬
‪-River of slime plastic pop bumper mod‬
‪-ECTO 1 Lighted Car MOD‬
‪-Arcade Keepup Dimming Backbox Kit‬
‪-TILT Graphics Sideblades‬
‪-Ghostbusters Scolari Brothers Drop Target Spring Fix Kit‬
‪-Shaker Motor Kit‬
‪-Custom Coin door magnets‬
‪-GB Keychain‬
‪-PerfectPlay Silicone Rubbers‬
‪-Flipper Fidelity Complete Stern Speaker System With 10" Woofer‬
‪-PinGuard Cabinet, Felt and nylon Leg and bolt Protectors‬
‪-Leg Leveler Rubber Castors - Set Of 4‬
‪-PinGuard SPIKE Shooter Lane Protector‬
‪-8-Way Power Splitter Board‬
‪-Metal Hex Spacer (Ramp Fix)‬
‪-BriteButtons Illuminated Flipper Button (Purple)‬
‪-Gozer Action Figure‬
‪-Pinmonk Full color LED Gels‬
‪-Die Cut Ball-Drop Protective Playfield Mylar‬
‪-Ghost Trap Flipper Bat covers‬
‪-Ghostbusters Pinball Backboard Illumination‬
‪-Ghostbusters Pinball Slimer Pinballs - Green with Pink‬
‪-Ghostbusters Pinball Scoop LED‬
‪-Swapped out to lower pressure plunger and auto launcher spring‬
‪-Extended Sling Protector with Center Post‬
-‪cp3r's Airball Protector‬
‪-Ghostbusters Mirror Replacement Mod‬
‪-Replaced with Williams/Bally heavy-duty inner Leg Bracket‬
‪-Stern Yellow flippers‬
‪-TerrorDog figures‬
‪-Ball Baron Ninja balls‬
‪-Added Stern service bulletin for the node boards‬
‪-Fixed the left flasher issue that can short out‬
‪-Custom Instruction cards‬
‪-Stern Tournament Button and Switch Assembly‬
‪-Ghostbusters Upgrade Kit - center post‬
‪-Replaced with Stern Lockdown Bar and Receiver Assembly‬
‪-Pinstadium lights kit‬
‪-Ghostbuster logo Plunger Plate‬
‪-Swinks Target Wedge - 4 Degree mod‬
‪-Stern Firehouse and sign‬
‪-Handpainted custom slimer covers‬
‪-Custom Subway car mod‬
‪-Yoyokopter pink outlane guards‬
‪-Yoyokopter ghost trap mod‬.
What do you think? Anything else to add?
[quoted image][quoted image][quoted image]

I don't see the lighted streams, that completes the look and it is interactive.

#8643 3 years ago
Quoted from kidchrisso:

I don't see the lighted streams, that completes the look and it is interactive.

Awesome. Where can I get it?
Thanks.

#8644 3 years ago
Quoted from Navystan:

Awesome. Where can I get it?
Thanks.

see post #8552 & #8559

#8645 3 years ago
Quoted from Navystan:

Back in the club. I had a GB before and it was a nice one. But this one is far better. And, it has the "Holy Grail" of toppers... . My previous one was loaded with dimples, but this has almost none, under 200 games.
Here's a link to detailed pictures: https://www.icloud.com/sharedalbum/#B0rJEsNWnJtkcNo
Here's how it's equipped/modded:
‪-Stern Topper
-Color DMD‬
‪-Full cliffy protector set‬
‪-NO GHOST ACRYLICS Speaker Grill Insert‬
‪-Custom Book stacking mod‬
‪-Stern Lasercut plasma gun side rails‬
‪-Custom Ghostbuster logo Backbox Hinge set‬
‪-Speaker Light Kit 10‬
‪-GHOSTBUSTERS 3D GHOST TRAP‬
‪-ECTO GOGGLES SHIELD‬
‪-River of slime plastic pop bumper mod‬
‪-ECTO 1 Lighted Car MOD‬
‪-Arcade Keepup Dimming Backbox Kit‬
‪-TILT Graphics Sideblades‬
‪-Ghostbusters Scolari Brothers Drop Target Spring Fix Kit‬
‪-Shaker Motor Kit‬
‪-Custom Coin door magnets‬
‪-GB Keychain‬
‪-PerfectPlay Silicone Rubbers‬
‪-Flipper Fidelity Complete Stern Speaker System With 10" Woofer‬
‪-PinGuard Cabinet, Felt and nylon Leg and bolt Protectors‬
‪-Leg Leveler Rubber Castors - Set Of 4‬
‪-PinGuard SPIKE Shooter Lane Protector‬
‪-8-Way Power Splitter Board‬
‪-Metal Hex Spacer (Ramp Fix)‬
‪-BriteButtons Illuminated Flipper Button (Purple)‬
‪-Gozer Action Figure‬
‪-Pinmonk Full color LED Gels‬
‪-Die Cut Ball-Drop Protective Playfield Mylar‬
‪-Ghost Trap Flipper Bat covers‬
‪-Ghostbusters Pinball Backboard Illumination‬
‪-Ghostbusters Pinball Slimer Pinballs - Green with Pink‬
‪-Ghostbusters Pinball Scoop LED‬
‪-Swapped out to lower pressure plunger and auto launcher spring‬
‪-Extended Sling Protector with Center Post‬
-‪cp3r's Airball Protector‬
‪-Ghostbusters Mirror Replacement Mod‬
‪-Replaced with Williams/Bally heavy-duty inner Leg Bracket‬
‪-Stern Yellow flippers‬
‪-TerrorDog figures‬
‪-Ball Baron Ninja balls‬
‪-Added Stern service bulletin for the node boards‬
‪-Fixed the left flasher issue that can short out‬
‪-Custom Instruction cards‬
‪-Stern Tournament Button and Switch Assembly‬
‪-Ghostbusters Upgrade Kit - center post‬
‪-Replaced with Stern Lockdown Bar and Receiver Assembly‬
‪-Pinstadium lights kit‬
‪-Ghostbuster logo Plunger Plate‬
‪-Swinks Target Wedge - 4 Degree mod‬
‪-Stern Firehouse and sign‬
‪-Handpainted custom slimer covers‬
‪-Custom Subway car mod‬
‪-Yoyokopter pink outlane guards‬
‪-Yoyokopter ghost trap mod‬.
What do you think? Anything else to add?
[quoted image][quoted image][quoted image]

The speaker lights / GB acrylic designs would look much better if you mount the speaker grills BEHIND the light frames.

H done white light (resized).JPGH done white light (resized).JPG

#8646 3 years ago
Quoted from DugFreez:

The speaker lights / GB acrylic designs would look much better if you mount the speaker grills BEHIND the light frames.
[quoted image]

Thanks, great idea. It does look better.

#8647 3 years ago

Has anybody airbrushed or painted their legs and lockdown bar etc ? The green on the le looks great, I’m thinking pink or purple maybe ? Any ideas ?

#8648 3 years ago

https://pinside.com/pinball/forum/topic/ghostbusters-interactive-cloud-mod-medisinyl-mods-bf-sale-#post-5856663

I just put a final run of these interactive cloud mods together (video in the thread). These are now permanently discontinued.

I have two left that aren't spoken for--available and ready to ship.

Total is $88 shipped. PM if interested.

EDIT: SOLD OUT.

#8649 3 years ago
Quoted from Navystan:

Back in the club. I had a GB before and it was a nice one. But this one is far better. And, it has the "Holy Grail" of toppers... . My previous one was loaded with dimples, but this has almost none, under 200 games.
Here's a link to detailed pictures: https://www.icloud.com/sharedalbum/#B0rJEsNWnJtkcNo
Here's how it's equipped/modded:
‪-Stern Topper
-Color DMD‬
‪-Full cliffy protector set‬
‪-NO GHOST ACRYLICS Speaker Grill Insert‬
‪-Custom Book stacking mod‬
‪-Stern Lasercut plasma gun side rails‬
‪-Custom Ghostbuster logo Backbox Hinge set‬
‪-Speaker Light Kit 10‬
‪-GHOSTBUSTERS 3D GHOST TRAP‬
‪-ECTO GOGGLES SHIELD‬
‪-River of slime plastic pop bumper mod‬
‪-ECTO 1 Lighted Car MOD‬
‪-Arcade Keepup Dimming Backbox Kit‬
‪-TILT Graphics Sideblades‬
‪-Ghostbusters Scolari Brothers Drop Target Spring Fix Kit‬
‪-Shaker Motor Kit‬
‪-Custom Coin door magnets‬
‪-GB Keychain‬
‪-PerfectPlay Silicone Rubbers‬
‪-Flipper Fidelity Complete Stern Speaker System With 10" Woofer‬
‪-PinGuard Cabinet, Felt and nylon Leg and bolt Protectors‬
‪-Leg Leveler Rubber Castors - Set Of 4‬
‪-PinGuard SPIKE Shooter Lane Protector‬
‪-8-Way Power Splitter Board‬
‪-Metal Hex Spacer (Ramp Fix)‬
‪-BriteButtons Illuminated Flipper Button (Purple)‬
‪-Gozer Action Figure‬
‪-Pinmonk Full color LED Gels‬
‪-Die Cut Ball-Drop Protective Playfield Mylar‬
‪-Ghost Trap Flipper Bat covers‬
‪-Ghostbusters Pinball Backboard Illumination‬
‪-Ghostbusters Pinball Slimer Pinballs - Green with Pink‬
‪-Ghostbusters Pinball Scoop LED‬
‪-Swapped out to lower pressure plunger and auto launcher spring‬
‪-Extended Sling Protector with Center Post‬
-‪cp3r's Airball Protector‬
‪-Ghostbusters Mirror Replacement Mod‬
‪-Replaced with Williams/Bally heavy-duty inner Leg Bracket‬
‪-Stern Yellow flippers‬
‪-TerrorDog figures‬
‪-Ball Baron Ninja balls‬
‪-Added Stern service bulletin for the node boards‬
‪-Fixed the left flasher issue that can short out‬
‪-Custom Instruction cards‬
‪-Stern Tournament Button and Switch Assembly‬
‪-Ghostbusters Upgrade Kit - center post‬
‪-Replaced with Stern Lockdown Bar and Receiver Assembly‬
‪-Pinstadium lights kit‬
‪-Ghostbuster logo Plunger Plate‬
‪-Swinks Target Wedge - 4 Degree mod‬
‪-Stern Firehouse and sign‬
‪-Handpainted custom slimer covers‬
‪-Custom Subway car mod‬
‪-Yoyokopter pink outlane guards‬
‪-Yoyokopter ghost trap mod‬.
What do you think? Anything else to add?
[quoted image][quoted image][quoted image]

And you're selling it so soon? You just got it... again!

#8650 3 years ago
Quoted from evileye:

And you're selling it so soon? You just got it... again!

ha! you caught me! Yes, but I'm not giving it away. If it doesn't sell soon, totally OK. I might be in a position to need extra cash, so with the small collection, this is number 3 of the 3 pins I have.

Promoted items from the Pinside Marketplace
$ 27.00
Cabinet - Other
Pin Monk
Other
12,367
Machine - For Sale
Athens, TX
There are 12,413 posts in this topic. You are on page 173 of 249.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/ghostbusters-club-we-got-one/page/173?hl=erak and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.