Quoted from andre060:
Curious if your distributor has asked you for payment on your LE yet?
Not yet. I have paid a $2,000 deposit though.
Quoted from Dr-Willy:
Is anyone having issues with when mass hysteria starts the flipper die? I had a regular at one of my locations tell me this two different times now. First I thought it was a fluke but seems it has happened again. I started mass hysteria once and the flippers didn't reverse no matter what I did.
Anyone else having mass hysteria issues?
I know this may sound crazy, but maybe reversed flippers have kicked in as they are supposed to. Your customer might be flailing away at the right flipper button and seeing nothing happen on the right side while the left one is going crazy. Thus the thought that it has died.
My left side Scoleri Brother doesn't come up. The right one works fine. Both have the PBL springs. What do you suggest for the left one?
Quoted from Schwaggs:
Does it not come up at all or does it not stay up? When I tried the PBL springs, one of mine would pop up and drop immediately.
Quoted from 3pinballs:
i've replaced mine with PBL, but the right one wouldn't stay up so I went and put the Stern one in and it seems to be working fine, but time will tell.
On coil test, it pops up nice and strong but immediately goes back down. I am going to remove the PBL springs on that Scoleri Brother and replace them with the originals (which, fortunately, I saved) and report back later tonight.
Quoted from vireland:
There should be a small plastic ledge that the flipper hangs on to stay up. That may have broken on that target. Stern changed them around Game of Thrones to be paper thin, so they break much easier than older ones that would work for decades on location with thousands of plays. Not sure if they made them thicker again for GB.
They don't look particularly thin om my GB, so I think they must have changed back.
Returning to the original spring has solved the problem. If I have issues in the future, I think I will just move the spring about 3 or 4 loops tighter.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside