Post #675 Links to the Pinball Universe upgrade kit for GB including new outlane plastics and center post Posted by Ballypin (7 years ago)

Post #709 Videos of the Pinballlife outlane plastics in use for GB Posted by Pinzzz (7 years ago)

Post #857 List of the switch errors that are reported in error in early GB software Posted by Ed209 (7 years ago)

Post #876 tatman9999 photos of his Titan Rubbers in green on GB Posted by tatman9999 (7 years ago)

Post #895 Another example of a member's attempt at airball protectors for the Left Ramp Posted by steigerpijp (7 years ago)

Post #913 KPG's early attempt at a left ramp airball protector w/photos Posted by kpg (7 years ago)

Post #923 Photos of shimming Slimer mech to combat low/dragging Slimer movement on PREM/LE models Posted by Mitch (7 years ago)

Post #984 First reporting of a GB premium in the wild.. Logans Arcade in Chicago Posted by Msch (7 years ago)

Post #1027 MT45's tweaks to the autoplunger to improve reliability w/photos Posted by MT45 (7 years ago)

Post #1034 Photos of mismatched flipper side rails installed on factory game Posted by Trekkie1978 (7 years ago)

Post #1082 Gary Stern calls KPG to discuss his GB issues Posted by kpg (7 years ago)

Post #1087 Gary Stern contacts another customer and he tells his tale Posted by Ranhorton (7 years ago)

Post #1121 MT45's slimer adjustment fixes w/photos Posted by MT45 (7 years ago)

Post #1125 Photos of the excess wire that may be on Slimer that can be trimmed Posted by Mitch (7 years ago)

Post #1209 MT45's airball plastic template and slime templates w/photos Posted by MT45 (7 years ago)

Post #1223 Close-up photo of the left ramp switch that often needs adjustment out of the box Posted by Mitch (7 years ago)

Post #1231 More photos of the left ramp switch that often needs adjustment for new game setup Posted by Mitch (7 years ago)

Post #1234 Example photos of what is referred to as insert ghosting and chipping at the shooter lane and outhole Posted by Shenanigander (7 years ago)

Post #1309 Reference to tournament mode aborting some animations Posted by dukejules (7 years ago)

Post #1320 CaptainNeo's comments and outline on how to raise the height of the outlane wires Posted by CaptainNeo (7 years ago)

Post #1326 Comments on shortening the hex stand-off for LE/PREM right ramp to improve shot flow Posted by CaptainNeo (7 years ago)

Post #1336 CaptainNeo's quick and dirty protector for the EctoGoggles Posted by CaptainNeo (7 years ago)

Post #1347 Photos of TaylorVA's modified airball protector installed Posted by TaylorVA (7 years ago)

Post #1351 Link to airball protector template from MT45 Posted by MT45 (7 years ago)

Post #1353 Additional comments and experience from TaylorVA with MT45's airball protector template Posted by TaylorVA (7 years ago)

Post #1420 Comments on adjusting the subway ramp for more reliable pass-through by slowing the ball down Posted by Bing_Party (7 years ago)

Post #1425 Comments on adjusting the subway ramp for more reliable pass-through Posted by Mitch (7 years ago)

Post #1448 Suggestions on autoplunger spring replacement for more reliable autoplunger action Posted by jaystile (7 years ago)

Post #1473 Photos of playfields showing potential color differences between playfield makes - speculation Posted by ronaldvg (7 years ago)

Post #1488 Relaying Chaz@Stern confirming autolauncher spring swap can help autoplunger 'too strong' issues Posted by jaystile (7 years ago)

Post #1500 Close-up photos of the auto-plunger spring people are replacing Posted by jaystile (7 years ago)

Post #1521 Hooked's version of modifying the subway for more reliable operation Posted by HOOKED (7 years ago)

Post #1524 Close-up photos of the Slimer connecting rod and set screws Posted by Mitch (7 years ago)

Post #1527 Pictures of Cliffy's TZ protector installed in the Ghostbusters outhole Posted by Sleaterkiss (7 years ago)

Post #1574 email from distributor about the playfield replacement program starting soon! Posted by Jive (7 years ago)

Post #1579 Notification that code v1.11 is now out! Posted by PeterG (7 years ago)

Post #1581 Notes and resolution on weird switch behavior due to shooter lane protectors Posted by chucksmith (7 years ago)

Post #1633 Updated shipping/pricing info on airball protectors from Oldpinguy Posted by OLDPINGUY (7 years ago)

Post #1700 Ecoto goggle protector offered by Hooked Posted by HOOKED (7 years ago)

Post #1711 Suggestion on replacement post for premium/le right ramp to improve reliability Posted by Trekkie1978 (7 years ago)

Post #1796 Stern replacement playfield is in hand for GB! Posted by Phbooms (7 years ago)

Post #1800 Report of slimer motor drive belt coming misaligned and example of trying to shim it to correct Posted by PinScott (7 years ago)

Post #2061 Reports of issue on a replaced playfield Posted by Phbooms (7 years ago)

Post #3817 swinks fantastic bracket that significantly reduces airballs. Posted by swinks (6 years ago)

Post #3923 Alternative hardware for switches to reduce airballs. Posted by conserx (5 years ago)