Topic index (key posts)

55 key posts have been marked in this topic, showing the first 10 items.

Display key post list sorted by: Post date | Keypost summary | User name

Post #1 Opening post with OP's index of topics Posted by exflexer (7 years ago)

Post #11 Photos of original slimer design Posted by exflexer (7 years ago)

Post #51 Photos of the captive ball wireform bending on early build GB machines Posted by tiesmasc (7 years ago)

Post #203 Early photo example of how the wireform near slimer bends - Corrected in later builds Posted by MrBellMan (7 years ago)

Post #426 Images showing the redesigned Slimer mech Posted by kpg (7 years ago)

Post #430 Pro manual updated to reflect the new slimer mech Posted by kpg (7 years ago)

Post #528 Photos of the Pinball Universe kit installed on GB Posted by sirlonzelot (7 years ago)

Post #565 Link to Pinball Universe Upgrade kit (Germany) Posted by sirlonzelot (7 years ago)

Post #630 GB 1.05 code posted and readme details! Posted by PinB (7 years ago)

Post #662 Link to Pinballlife's alt springs for the Scoleri brothers targets Posted by exflexer (7 years ago)

Show all 55 key posts in the index

Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider supersquid.
Click here to go back to viewing the entire thread.

Had my machine now for about 3 weeks. The Slimer mech would only count shots that were straight on for the most part and that wasn't bad. Last night for some reason, it wasn't even registering those. It had to be the perfect shot. I took off the top cover plate on Slimer, loosened the 2 nuts under it, moved the black block to the middle of the ovaled out holes, tightened the nuts to hold it in place, and installed the cover back on. It loosened up Slimer and now it registers pretty much any hit on Slimer. Thought I would share in case anybody else has this problem. Mine was a NIB purchase, so it has the updated Slimer mech on it.

I set mine to go off at 8:00 P.M., since I will never stay up till midnight to play it, and it works. Did you try setting the clock/time forward a few hours or so to see if it works?

If I remember correctly, I would set my time to 5-10 minutes before midnight and start playing, but nothing would happen. The next day it would work. Seems like it needs 24 hours after setting clock to work. That's if i remember correctly, it's been awhile.

Quoted from seenev:
I'm guessing it's a common issue but I haven't found it exactly yet searching... My slimer is registering hits randomly when he isn't hit with the ball. Any suggestions?

Sounds like it is just out of adjustment. Here is what I did to mine when it was to tight and not registering almost any hit. Been working fine ever since.

Quoted from gk_usa:
Okay, I hope everyone understands my dilemma. Was playing a game and this comes on to the playfield and slides down to the bottom. I wish I could go back and watch carefully where it came from but all I know is it landed on right side about where right orbit starts and then slid down playfield.
I looked and search through entire manual looking for key words "black" and "spacer" and nothing matched what this is.
Someone please help me figure out where this goes or where the heck it came from...aaaaaa[quoted image]

Looked at my pro and think this is where your post came from. Actually goes upside down on ramp, not on play field. Kinda hard to find.

Ramp Post (resized).jpg

Ramp Postr (resized).jpg

Quoted from gk_usa:
Awesome! Yup, no black spacer in mine. Which means it fell onto playfield above terror dog target.
So it just floats? I don't see how it keeps ramp up above plastic below it since you don't necessarily connect the ramp to the plastic below that covers playfield. In essence what the hell does it do? Ha.
Second, can I send you guys money for a beer. Life saver! Does pinside allow that?

No need for beer money. Just glad I could help a fellow pinballer.

Quoted from TonLoc777:
Anyone have issues with the right orbit registering shots consistently? It seems to be happening a lil more often with a direct quicker shot through the right orbit. It’s almost like the shot was too quick for the opto? Any advice is appreciated.

I have a pro and there is no opto on the right orbit, only a rollover switch. Probably needs to be adjusted a little.

Promoted items from Pinside Marketplace and Pinside Shops!

You're currently viewing posts by Pinsider supersquid.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

Help – Contact – About Pinside – Support Pinside – Top

Ghostbuster Issue Thread

By exflexer

7 years ago

Topic Stats

You

Find in topic

Linked Games

Topic Gallery

Topic index (key posts)

Supersquid

Supersquid

Supersquid

Supersquid

Supersquid

Supersquid

Supersquid

Reply

Hey there! Welcome to Pinside!