Topic index (key posts)

55 key posts have been marked in this topic, showing the first 10 items.

Display key post list sorted by: Post date | Keypost summary | User name

Post #1 Opening post with OP's index of topics Posted by exflexer (7 years ago)

Post #11 Photos of original slimer design Posted by exflexer (7 years ago)

Post #51 Photos of the captive ball wireform bending on early build GB machines Posted by tiesmasc (7 years ago)

Post #203 Early photo example of how the wireform near slimer bends - Corrected in later builds Posted by MrBellMan (7 years ago)

Post #426 Images showing the redesigned Slimer mech Posted by kpg (7 years ago)

Post #430 Pro manual updated to reflect the new slimer mech Posted by kpg (7 years ago)

Post #528 Photos of the Pinball Universe kit installed on GB Posted by sirlonzelot (7 years ago)

Post #565 Link to Pinball Universe Upgrade kit (Germany) Posted by sirlonzelot (7 years ago)

Post #630 GB 1.05 code posted and readme details! Posted by PinB (7 years ago)

Post #662 Link to Pinballlife's alt springs for the Scoleri brothers targets Posted by exflexer (7 years ago)

Show all 55 key posts in the index

Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider rooky79.
Click here to go back to viewing the entire thread.

Quoted from MT45:
Update to my GBLE Airball fix plastic.
https://pinside.com/pinball/forum/topic/official-stern-ghostbusters-speculation-thread/page/330#post-3292934
Added some green slime to plastic using white decal paper
Slime template is HERE:
https://drive.google.com/folderview?id=0B9aPFmNkJCM7U0xIQzVHeE1Lems&usp=sharing
1) Print at full size, with printer setting to photo paper
2) Use exacto knife to trim the slime parts (wow! hard)
3) Trim back end (straight edge) using metal ruler
4) Clean up the "tips" of the slime (you wont be able to perfectly cut them round)
5) Test on plastic
6) Remove backing starting on left orbit edge and work toward middle of plastic

Hey this 0.93 Lexan, what's the thickness of that in mm?

I'm getting one cut in 2 mm thick. Is that okay or too thin/thick?

Cheers

Hey guys,

I lifted the PF yesterday on the Prem to install the art blades and noticed a sticker on the left side that was handwritten "Harold LE"

I might have a look under the apron and see if there's a signature like the one that was found in an Aussie one.........

Not sure how many games in, but quite a few and (touch wood) no issues so far except for a small amount of CC chipping in the shooter lane which I've mylard and will get the cliffy lane protector. I reckon that's a must

Quoted from Chambahz:
1) Under Feature Adjustments #11, you will find 'Trough Eject Power', I have mine set at 240- you may wish to lower yours until it's at a ball eject power which will help to reduce possible shooter lane chipping.
-Thanks to JMK for this tip. Hope you guys find it useful as well. I minimized mine, just because I see no reason to have it rocket out of there. It can only reduce wear on the game in my opinion.

Wicked cheers mate I'll do that.

I wondered if it was possible but couldn't see it

Hey guys I'm going to post this in a couple GB threads. I'd appreciate the help

So something weird happened yesterday.

On Saturday, I updated to 1.10 and played a bunch of games and noticed quite a few bugs

Last night I had a few games and I noticed the left flipper sometimes when I pressed it would stay up.

Any ideas on what this could be?

So I haven’t been keeping up with GB or been playing it much but my wife and I pulled the covers off and had a few games.

It reminded me to check out if there’s any news on the wizard mode actually getting finished or is this game finished as is now and left for dead because of the Trudeau issue?

Hey guys, I’ve had a couple of issues with my GB Prem running code 1.13 and I’ve got someone onto it to fix, but figured I’d chuck it up here in case someone had a similar issue.

First, the librarian scoop wasn’t registering and looked like a switch issue. The switch was replaced and still a problem with intermittent registering. Turns out it was the connector. So that got changed and now works right as rain.

Then the optos in the subway and right orbit went dead. They don’t register at all. There were some VUK kicking off too by themselves but I wasn’t there when they had a fix for that.

Just wondering if it’s anything to do with the node boards I keep hearing about shitting themselves. I have next to no experience in troubleshooting this stuff

Cheers in advance

Quoted from PinMonk:
For the optos, I belive they just plug into a distribution board, Follow one of them back from the opto to the connection and I'd check all those connections and see if they just came loose.
Have all the service bulletins been done on your machine? The later run machines had them done from the factory, but early to mid run you may not have them done, and that can definitely mess up your machine:
Flasher insulation:
https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB188.pdf
Node Board component reinforcement kit (so the diode doesn't break off the board):
https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB189.pdf
Capacitor kit to stop false switch activations:
https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB190revB.pdf
Being international, I'm not sure how you get these service kits. In the US, you just call Stern and they send them to you for free. Maybe contact your distributor?

Cool thanks for that chief. Appreciate it.

Anyone had any of their GB node boards blow?

Quoted from PinMonk:
As long as you do the two service bulletin updates they're pretty stable.

Hmm I’m not so sure about that. At least 5 machines (GOTG, GB x 2, BM66 x 2) I know off all have the service updates and a mix of 8, 9 and 10 boards, so not so sure on the service update making them stable....

Promoted items from Pinside Marketplace and Pinside Shops!

You're currently viewing posts by Pinsider rooky79.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

Help – Contact – About Pinside – Support Pinside – Top

Ghostbuster Issue Thread

By exflexer

7 years ago

Topic Stats

You

Find in topic

Linked Games

Topic Gallery

Topic index (key posts)

rooky79

rooky79

rooky79

rooky79

rooky79

rooky79

rooky79

rooky79

rooky79

Reply

Hey there! Welcome to Pinside!