Ghostbusters (LE)
Stern, 2016
Ghostbusters (Premium)
Stern, 2016
Ghostbusters (Pro)
Stern, 2016
Star Trek (Pro)
Stern, 2013You're currently viewing posts by Pinsider rokablly.
Click here to go back to viewing the entire thread.
QUESTION?
I purchased the two shooter lane protector pieces (sold separately) from Pinball Life and afterwards I learned that Cliffy has a 3 piece set. Would you spend more money and buy the Cliffy set instead?
I should be getting my Premium mid December per my distributor. 
Expecting my Premium next month and was wondering if the Scoleri Bros drop target springs are still an issue and if I need to get the replacement springs from PinballLife. It seems the captive ball wire support is no longer needed as it is being resolved at the factory.
Thanks!
HELP!
Got my Premium yesterday and besides the crazy random and consistent air balls I am having issues with the ball not making it out of the subway tunnel. I remember others mentioning this but can't seem to find the fix for it. Any help would be appreciated.
FYI, I have the bubble sitting in the middle of the level but it is right on the bottom line. The game is so fast I was hoping that would slow it down a bit.
Thank you!
Just took off my Cliffy's for the Scoleri Bros targets. It was apparent they were causing air balls. The ball would literally jumping over the air ball protector I bought for the 2x and 3x targets on the sides of the left ramp.
Thankfully the mirror for the Ecto Goggles was not broken. However, I still ordered the fully enclosed plastic protector for the Ecto Goggles from Hooked On Pinball to be safe.
Quoted from Alby:I'm confused how the Cliffy Scoleri Bros protectors could cause airballs , are u saying the balls ricochete off the protectors ?
It gave it just enough of a lip that it was launching (ricocheting) the balls off it. Even Cliffy said he could see how that could happen.
Quoted from Arcade:Let us know if you get it working.
I couldn't get the nut to hold the metal rail center despite how tight I got it so I folded a piece of paper and made a shim. Shimmed it dead center and I haven't had a hang up in the subway tunnel since. You can see the white paper in the pic.
Quoted from JimB:I've had no issues like that with mine.
I haven't had any issues since I took them off. Believe me I didn't want to take them off but they were clearly an issue for my pf.
On a positive note, my Premium came with an LE pf signed by John Trudeau. The pf has handwritten on the side in sharpie 11-22 and a hand written sticker on the bottom that says Harold L-E 4 and another hand written sticker on the top that says Display Premium.
Anyone think I should put mylar over the signature?
Quoted from chucksmith:https://www.titanpinball.com
This is probably the best you can hope for on shipping . I received a complete set of rings for ghostbusters + more parts, $4 shipping
Thank you Chuck! Do you know if that would be the standard size post sleeve? My guess would be yes.
Quoted from hoby1:S/B bro targets adjusted correctly so the height of the target is a ( c@#t hair above the PF ). No issue thus far after two months.
How did you adjust the drop targets? More accurate question, how do you adjust the drop targets?
I was going to cut a rubber post sleeve to place around the outer lane posts to help prevent drains but I have no idea what size sleeve(s) to get, can someone help me? If anyone has a extra(s) black one they want to sell and mail me that'd be great too. Thank you!
Quoted from PinMonk:Are you getting lane hops (from the inlane to the outlane over the bar)? Have you closed up the posts all the way already? Picture of your lower PF would be helpful to see where you're at already.
I have the plastics to prevent the lane jumping already. I was looking for something to put on the the end of the outer lane guides to lessen the drains. Close the opening some.
There's a guy in France selling something that looks like he 3D printed to snap on but for $30 I'll pass.
Quoted from PinMonk:But did you close up the outlane posts?
I am asking what to use or do to lessen the gap while still allowing drains. Just not as easy or frequent of drains.
Is there something to put on the end of the lane guide circled in blue to lessen the gap in red?
7CC62D88-A8C9-4AB7-AF13-3D6898501F07 (resized).jpegD50E572D-9D83-4FA0-B584-C1EE38077F60 (resized).jpegYou're currently viewing posts by Pinsider rokablly.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=rokablly and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Riverside, CA