Ghostbusters (LE)
Stern, 2016
Ghostbusters (Premium)
Stern, 2016
Ghostbusters (Pro)
Stern, 2016
Star Trek (Pro)
Stern, 2013You're currently viewing posts by Pinsider ralphwiggum.
Click here to go back to viewing the entire thread.
Quoted from Phbooms:Glue curing and shrinking under the playfield and insert dropping maybe?
This is the more likely scenario.... My guess is change in technique, and now these inserts are moving from underneath the clear. Same inserts, same wood, same glue, has to be different application.
Quoted from paul_8788:I have the electrical tape on mine, not sure if the friction is going to be enough to wear through the tape. I'll check it every 100 games or so I guess. If someone does have a better solution please post it
I have zero problems with this issue, but instead of electrical tape, maybe heat shrink tubing would be a better application?
Quoted from paul_8788:The solution so far is to place a piece of electrical tape in the top of the first metal ring on the subway ramp, not sure how heat shrink tubing would be used there.
right.... slice the tubing, wrap the ring area, heat it up, shrink it into place. clear tubing would probably be the best looking.
my pitch is at about 7.5 degrees, and my coil strength is low... wondering if this has anything to do with not having this issue....
Quoted from golfingdad1:I haven't seen or heard of any ghosting on any GB premium made after Late September.
I'm surprised that someone would actually say that on a tour .
Mine is September 24th or 26th (don't recall).... My Tobin's started ghosting after about 50 plays. it hasnt gotten any worse now after about 75 plays though. No other inserts seem to have this issue yet (knock on wood)...
Quoted from PinMonk:Some of the newer Sterns are more adjustable, but I don't think GB has an adjustment this specific. All you can do is set the coil power to "soft" overall. Nothing like JJP or AP offers in per-coil power adjustment.
Each individual coil has level settings that are completely customizable on Ghostbusters. The one I suggest everyone do is adjust the shooter lane kickout coil to the lowest setting. This reduces shooter lane wear greatly.
You're currently viewing posts by Pinsider ralphwiggum.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=ralphwiggum and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sullivan, WI