Quoted from embryon:Hey guys wanted to change some rubbers to clear and am finding it difficult to change the 1-1/4" near the right outlanes and subway ramp exit. Removed the screws and nuts on the plastic, spotlight, and top of ramp but cannot lift the plastic near the right post. I see there's 7 wood screws that hold the plastic ramp. Do I need to remove this ramp as well to replace this rubber. If so its staying black. Pls advise if you have changed this one
I was able to remove all the nuts and screws holding down the plastic and the storage container, then lift slightly and rotate the plastic counter-clockwise around the subway ramp. It pretty easily worked its way out and I could get to those posts with no problem.