Ghostbusters (LE)
Stern, 2016
Ghostbusters (Premium)
Stern, 2016
Ghostbusters (Pro)
Stern, 2016
Star Trek (Pro)
Stern, 2013You're currently viewing posts by Pinsider neilmcrae.
Click here to go back to viewing the entire thread.
The stern guys said the playfield issue hadn't been fixed yet when we were at the factory last week, so dates are largely irrelevant until we hear them say it's fixed. Latest guess has it the new play fields will arrive in November as a few folks have been told new play fields to replace duff ones will be delivered in November.
Quoted from stpcore:Which "Stern guys" are you talking about?
I asked three different guys (senior guys!) who were leading the tours, no I won't name them but several people on the tour I was on can attest to this.
I specifically wanted to see if they all said the same thing - which they did, they are aware of the play field issues, its got lots of focus in stern it isn't fixed yet; but will be soon and they will start replacements on GB first and other tables in the new year.
Neil.
Quoted from golfingdad1:I haven't seen or heard of any ghosting on any GB premium made after Late September.
I'm surprised that someone would actually say that on a tour .
i hear a bell ringing!
"WE GOT ONE!"
LOL
regards,
Neil.
Quoted from HOOKED:I believe my game may have been one of those that have had the PF replaced. First I have no issues...Second my cabinet was dated late Aug...Third my ship date was 10-14. I would not understand why they would hold a finished game 7 weeks unless it was swapped but time will tell. My pf was hand written 260's and my game is 500 of 500 LE.
Give. It's an LE I'd say that's not outside the realms of possibility and it would be nice to know that stern focused on the LEs first - What's the date on the PF?
For the record my premium is dated August and hasn't got any issues yet but I'm predicting I get them. Also no issues with subway, launch mech or slimer in fact - no issues at all so far! Minor nit is thati have the LE apron stickers but I can live with that.
Neil
Quoted from ExtremePinball:Adjusted target springs about 10 coils in since day one. Currently just past 10,000 plays and no target failure or defects.
would be good to get some feedback on the areas the machine has after this number of plays, anything that might be worth doing as preventative...
thanks,
neil.
Quoted from OLDPINGUY:Thank you very much! One kind word, makes all the work worthwhile!
Of course! I have always enjoyed shipping almost anywhere in the world.
I need to test pack and weigh, but I am hoping/believing, shipping overseas to be between $5-$8
more...
i'll take one please 
Quoted from conserx:I picked up a new in box GB Pro in December 2017 (July 2017 prod run)
The air balls were quite ridiculous as everyone here knows (Why Stern/Trudeau went with the straight angled target bracket is beyond me).
I switched out both left ramp standup targets with this type & the air balls have been pretty much eliminated:
did you swap the whole thing?
Quoted from swinks:hey conserx check out the link below
https://www.shapeways.com/marketplace?q=swinksgb&sort=newest
everything is made at Shapeways and charge $15USD to Aus
Ive got these to install also.
I'm kind of hoping that once these are in I can take of the PET airball deflector as it looks pants.
Neil.
Quoted from ArcadiusMaximus:So installed my Swinks brackets the other day. And had plenty of shots ( bricks mostly ) to the stand ups. Not even a hop from the ball ! Trust in Swinks. Put those brackets in and get that ugly piece of plastic out ! Best "mod" you can buy.
me too, they are brilliant - taking that annoying plastic airball protector off makes the game flow so much better.
You're currently viewing posts by Pinsider neilmcrae.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=neilmcrae and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
London
Denver, CO