Ghostbusters (LE)
Stern, 2016
Ghostbusters (Premium)
Stern, 2016
Ghostbusters (Pro)
Stern, 2016
Star Trek (Pro)
Stern, 2013You're currently viewing posts by Pinsider mikes.
Click here to go back to viewing the entire thread.
Quoted from pinballkyle:Stern said to bend back at the base. But I said it's just going to re-occur and needs a better fix IMO ?
Hopefully they put in a thicker gauge wire form for later runs. Would be an easy enough mod for someone to come up with.
Quoted from steigerpijp:I made this as a one off by hand, but seeing that it works so well and People want to purchase ill look into getting a small batch laser cut, feel free to drop me line.
Art " oldpinguy" reached out and offered to hook up a Stateside manufacturer and help get some of these produced. First though a Digital file needs to be made for cutting.
Keep busting for now !
Joe at Laserrific would be a great choice to manufacturer these Stateside: [email protected]
Quoted from TaylorVA:Completed Stay Puft numerous times now and whenever starting the Multipliers are all 1x. Anyone know how to increase these or is it not even in the code?
I've been to Stay Puft a handful of times and the multipliers were all 1x everytime just like they are for you. I'm not sure how to increase these but would love to find out!
Quoted from CaptainNeo:how the hell are you getting to stay puft so easy? I have yet to reach him once. But I do not have a center post and set to about 7degree pitch. Factory side posts and standard stock everything.
Once you know what you're doing it's not that tough Neo. I've made it there numerous times on a route game with stock settings. The first 2 modes should be a breeze to get through. When you're in Gozer mode shoot the right ramp right away and then the Gozer target. Then shoot all the lit shots (I think there's 4 of them) and the Gozer target again to complete. Then it should be lit at right orbit.
Quoted from CaptainNeo:I guess that's the problem. the first mode is easy. Sure. Second mode is easy until I have to do the far right shot. It's so exact on mine, that 10% it makes it and goes through all the way. Even with my modifications. Before it wouldn't go through at all from a shot, it would have to be some off the wall weird bounce hit off the flipper to make it all the way up.
I've made it to gozar several times, but again you have a far right shot that has to be made again. Getting it the one time was difficult enough, to try and do it twice in the same game is damn near impossible on my machine.
Yeah that right ramp is the toughest part of the game. I'm getting a lot better at it but I still only make it about 35% of the time. Luckily it's not a shot that you need to hit all that often throughout the game other than PKE Frenzy.
Quoted from CaptainNeo:Really? Did you just sign up for pinside today? You are watching a group that is complaining about the edge getting worn under the apron where the ball drains and nobody ever sees. A place where people complain about dimples that are suppose to happen, and the clear lifting in shooter lanes, that has been happening for 30 years, but now all of a sudden, it's catastrophic. All those things that people shouldn't even be giving a shit about, becomes a bitch session, and you don't think THIS won't effect resale value? Welcome to pinball, glad to have you here and enjoy the hobby.
Yeah, It will negatively affect resale value assuming it is disclosed to the buyer. Probably not a ton, but maybe ~$500. I know I wouldn't want to own a game with an irreversible cheat mod. I don't know how many games I've seen over the years' where someone put in a center post that wasn't supposed to be there. -I've even seen it on a newer game like TZ.
You're currently viewing posts by Pinsider mikes.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=mikes and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Athens, TX