The right lane post is a real job to move. I moved the left one in 2 minutes, but the right one will require removing the subway ramp and the containment facility. This part of the machine is a horrible design.
You're currently viewing posts by Pinsider glasairpilot.
Click here to go back to viewing the entire thread.
The right lane post is a real job to move. I moved the left one in 2 minutes, but the right one will require removing the subway ramp and the containment facility. This part of the machine is a horrible design.
Problems I have experienced with GBLE in order of frustration:
1. Subway balls do not sit correctly in trough when locked; therefore, additional ball is not put into play until you shake the machine to correct. If you elevate the right legs to make it work correctly the left launcher does not hit the right flipper in the correct spot and the right launcher does not hit the left flipper correctly.
2. Inlane guides are WAY too short. Sometimes even the subway ramp return flips the ball to the right drain.
3. Airballs are excessive and many times leads to a ball drain.
4. Ramp switch leading to subway did not always register a shot. This was fixed by bending the top guide down.
Otherwise, the best pin I have ever owned as far as looks, sound, and light show.
I would like a fix for the top 3 problems.
Broke my ecto googles LCD screen today with an air ball. Game Room Guys was nice enough to send me a side protector for it, but it did not help. Had an air ball off the left flipper and it was a direct hit on the screen. Anyone make a protector for airballs that do not originate from the left side of the play field?
Also, installed 1.12. Installed correctly according to the display screen; however, Slimer quit moving and would also not respond to commands to move in the diagnostic menu either. Checked the fuse for the motor and it was good. Checked for 24V and was good. Re-installed 1.10 and Slimer worked again. Downloaded 1.12 again and re-installed and Slimer started working again and the diagnostic commands were different also. I'm wondering if a Node board did not update correctly the first time. Anyway, working now.
Quoted from chucksmith:Order this item.
http://www.hookedonpinball.com/store/p102/Ghostbusters_Ecto_Goggle_protector.html
Call Stern tech support to see if they will send you a new one. Take photo before you call. They will ask to see it.
Good news: Pat from Stern support asked me to send him my seria number so he could send me a warrantied screen. I appreciate the quick reply from Stern. I will update the progress.
You're currently viewing posts by Pinsider glasairpilot.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=glasairpilot and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.