There are some spot welds in the scoop that may have let go.
You're currently viewing posts by Pinsider deafcon.
Click here to go back to viewing the entire thread.
I took the mylar off in the right orbit before the switch also. It fixed my problem with the switch not registering as well!
Quoted from mbt:Does anyone know why the clear inserts in front of the slings sometimes stay on? This is on a premium, and I seem to notice it after playing a few modes /multi ball but I haven't figured out the pattern.
It's an indicator the magna slings are in a more active state.
Quoted from Trekkie1978:So I adjusted the ramp to have all the rail bars on the inside of the plastic. Works much better, but I still get shots that don't make it all the way back up.
On my old playfield, the ball would make it back up 100% of the time. On the new playfield, it's 80% of the time. I tried adjusting the plastic underneath, but there's no play in it.
The only other thing I could think it is, is maybe the wire form isn't tight enough and the ball is rattling side to side, causing the ball to lose velocity.
Did you find a fix? My GB just started doing this, i checked the alignment of everything and made some adjustments but the problem persists.
You're currently viewing posts by Pinsider deafcon.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=deafcon and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.