I have le#258 and the only issue I have the ball ramp/lane issue. I found the plastic fixes. No other playfield quality issues. Must have gotten lucky.
You're currently viewing posts by Pinsider calprog.
Click here to go back to viewing the entire thread.
I have le#258 and the only issue I have the ball ramp/lane issue. I found the plastic fixes. No other playfield quality issues. Must have gotten lucky.
First Stern issue on gble. Half my lights are flickering and out. Stern thinks thinks I have the short issue above left scoop. I put double sided tape and still not corrected. They think I may have burnt it my board. For a new game this really sucks. What a poorly built game! The worst one yet. Looks like I will need a tech to look at this issue. The game is unplugged and I did not play over the holiday weekend. Played Tales from the Crypt mostly. A great game for sure!
After. Was unaware of the issue. It seems the machine has so many problems that I can't keep up with it. They will supply all the parts I just need to pay the tech. That's the way it goes. All my other Sterns have been fine and I go back to LOTR. I will most likely cancel my batman66 LE or sell it. Not sure yet.
Have my lights are out all of a sudden. Had a tech look at it as I could figure it out. Have open circuit issue. Looked like a 9 year old put this machine together. Several plugs not plugged in and several that go nowhere. Omg. My last Stern game. Such poor quality. I could cry. Just canceled Batman66. Good luck to all GB owners.
You're currently viewing posts by Pinsider calprog.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=calprog and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.