Quoted from achtungboyy:I did the code update on my Ghostbusters and now Slimer does not come down to hit anymore. Is there anyway to fix that?
Check it in diagnostics.
You're currently viewing posts by Pinsider Tmezel.
Click here to go back to viewing the entire thread.
Quoted from achtungboyy:I did the code update on my Ghostbusters and now Slimer does not come down to hit anymore. Is there anyway to fix that?
Check it in diagnostics.
Potential improvement to fix Slimer hits. I made a wedge that fits inside under the Slimer ball so when the Slimer is hit from the side, the angle deflects it off the actuator plate. Then I added a spacer on top of the ball so you can but the plastic back on and tighten it down to hold the wedge in place. Play testing now.
Quoted from Tmezel:Potential improvement to fix Slimer hits. I made a wedge that fits inside under the Slimer ball so when the Slimer is hit from the side, the angle deflects it off the actuator plate. Then I added a spacer on top of the ball so you can but the plastic back on and tighten it down to hold the wedge in place. Play testing now.
Anybody interested in this simple mod for the first build of the Slimer mechanism?
Quoted from Ballypin:Tim, does you Slimer mod help it face center? Mine and others I have seen are twisted to the left.
I don't think so. I think it is how Stern put the wire through and how well it fit in the cutout underneath him. Mine is straight.
Quoted from jar155:I'm getting lots of phantom hits on Slimer. Time to poke around.
Which revision?
You're currently viewing posts by Pinsider Tmezel.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=Tmezel and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.