Ghostbusters (LE)
Stern, 2016
Ghostbusters (Premium)
Stern, 2016
Ghostbusters (Pro)
Stern, 2016
Star Trek (Pro)
Stern, 2013You're currently viewing posts by Pinsider Bing_Party.
Click here to go back to viewing the entire thread.
Did you try to switch the settings on the shaker to see what it will do. I read somewhere a ways back that there are different levels you can choose to have the shaker motor working, maybe changing that could help...though its odd that it just does not shut off.
Some distributors offer the shaker motor with the premium and they install it thats why you see a lot of folks with the shaker
Quoted from Pablomck:Had Premium a week, having some tuning issues:
1) It was mentioned about the ball getting stuck in the the subway and rolling back and forth, then it goes into search and kicks it out. happens about 50% of the time. I've adjusted the switch at the top of the subway ramp, and it seems to get hit each time. I've adjusted the diverter so it's not rubbing on the plastic, and I've raised the back all the way up so that it has plenty of speed, but doesn't make it back out the subway and then it goes to ball search.
2) about 100% of the time when the ball exits the library lock it goes straight between the two flippers, I've adjusted the play field so that it tilts to the right a little and they i'm proved to about 50% of the time. Don't see where I can adjust the scoop, any ideas?
Got this from another thread....The ball was getting stuck in the subway. This was 100% due to the ball moving too fast through the ramp and when it came to the drop it would fall without making contact with rails and roll back and forth. A little electrical tape in the first ring on the right slowed it down to where it hasn't happened yet. FIXED.
Quoted from Mitch:Are steel ball rolling over electrical tape will pick up the sticky glue off the side and more glue when it wears through leaving dirt and sticky stuff on your playfeild and subway.
good point, and I dont know. Glad you found the fix being under the playfield..that was a different issue.
Quoted from omgitsadam:I had an issue with that same scoop where the screws holding the scoop in place got loose, but my switch was fine.
Strange this scoop is a sore spot for me to. The steel lever the ball sits on keeps popping off. I bent it in a little thinking it was to close to the plunger. It hasn't snapped off since and got fingers crossed
You're currently viewing posts by Pinsider Bing_Party.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ghostbuster-issue-thread?tu=Bing_Party and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Palm Beach, FL