Can anyone help with ghost scoring, happening when I’m pushing the flippers
You probably have a switch that isn't adjusted properly and is getting triggered when there's vibration.
Run a switch test to figure out which switch is being triggered.
Do you have an original MPU or a newer after-market MPU?
If you have an original, there are some instructions in the manual: http://www.ipdb.org/machine.cgi?id=2644
If you have an Alltek MPU, you will need to visit the support section of their site for a manual, but it basically works the same way as the original MPU.
Turn the game on. Start a game and with the glass off tap around the playfield with your fist. Or hit the flippers and see how many points it's scoring.
This will tell you where to look. My guess is one of the top round targets. Or one of the leaf switches behind a rubber.
Or the rollover button in the left lane.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside