Bossier City, LA
Did you just recently do any work such as replacing switch,diode,part,ect. anywhere under or above the playfield?
(Topic ID: 257896)
Linked Games
Getaway: High Speed II, The
Williams, 1992
Topic Gallery
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Quoted from FlippinJimmy:I did some work with one of the Transistors. I took the pad off the board when I tried to unsolder the old transistor but didn't think I touched any other traces or pads.
The correct sound does play when I hit the supercharger. If the supercharger were playing the bumper sounds I would think that I hooked up the wrong wire somewhere but that is not the case.
It is either an issue with my Pinsound or Board I believe.
Ok,How about taking a look under the playfield at the pop bumpers and check and see if any loose wiring or if there are diodes that might need to be tested
Oh no do not use screwdriver You can cause a short very easily doing that, use a ball ok, Ok have you tested the diode on that top pop bumper?From looking at your pics pic 1 and pic 3 the diode(Banded side) is soldered in a different direction than the one in pic 2. For pic 1 and 3 follow each of them wires going upstream to another switch and see if the diode is soldered(Banded side) in the same direction as pic 1 switch and pic 3 switch.
Quoted from FlippinJimmy:Okay, will use ball in the future.
Have not tested the diode. Researching that now.
Think I have the wires soldered on the wrong side of diode. Changing that now. Possibly ruined the diodes??
Do you have the schematics on hand?
Quoted from FlippinJimmy:Mike, I switched the wire to the black side of the diode on all of the bumpers. Problem is now solved. Can't thank you both enough for your help.
Feels great to have the machine working again and to solve the issue.
Awesome!!!! Have fun my friend
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
