Quoted from cavalier88z24:Bump this thread. I have divortor error on my high speed 2. In test mode divortor high works but not divertor low. Check resistance from coil back to power driver board. It is good. Any suggestions?
Cav,
I have the same divertor issue. Makes sense to check the opto for the supercharger by blocking it and watching the divertor open and close. I did a divertor test and it works, so it must be the opto not telling the divertor to open and let the ball into the supercharger. HS2 is new to me just as of last week, so I have a bunch of questions. I suggest you check out the Getaway thread for more info; https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin