I've noticed that the circle of triangulated inserts on the lower playfield containing RPM, Redline, and X Values, are not rotating round and round when in attract mode. They do fine and rotate when in normal game play. They are all led's. Thoughts?

Getaway RPM Circle (resized).jpg

Newbie here. How do I know “Which S/W Version do you use?”

It says 50004 Rev. L-2

Yes, that was it! I did have it in "Photo shoot Mode". It works properly now. The one thing I do notice now is that in Photo Shoot Mode, the circle of lights wouldn't flash, but the three supercharger lights would flash. And now out of photo shoot mode, the circle of lights rotate, but the supercharger red lights don't flash anymore. But, according to videos I've seen on YouTube, that looks to be correct. Thanks Steve1515 and everyone else for your suggestions!

I’m attempting to replace the rubbers by the pops, but I’m confused by what I removed versus what IPDB shows. There are double grooved posts allowing for the stacking of rubbers,but do they possibly use a large band on the bottom tying three posts together, with a single rubber on the top groove of each respective post, or larger bands tying three posts together top and bottom?

16D06994-7C76-4DDE-AA1F-36AEBA79F66E (resized).jpeg

84ABEE12-F076-48AA-AB00-0D01FAADAC86 (resized).png

E0F34C89-1510-4523-9857-C862C13161AB (resized).jpeg

Great, yes it does help! So I have the rubbers on the right side correct. I can't tell from your pic if I have them correct on the left side. kdunbar also responded and it appears I may have the left side incorrect. Thanks!!

Thanks! I apparently have the right side correct, but not the left. The way I replaced the rubbers on the left was how I removed them, but IPDB threw me.