Hi guys,
How do you get the l2 Rom? How do you install it ?
My game is pretty stock....
Thx
You're currently viewing posts by Pinsider paseb.
Click here to go back to viewing the entire thread.
Quoted from curban:I got the ones from classicarcades off eBay.
ebay.com link » Getaway Pinball Machine Cabinet Decal Set
A bit pricey, but smooth transaction, quick delivery, and good quality.
Thx, just ordered a set
Quoted from punkin:Just got some out of Croatia, don't know if they are the best, but they were the best value for me in Australia with free shipping.
https://pinballdecals.eu/shop/the-getaway-high-speed-ii-pinball-cabinet-decals-set/
thx for the reference
just installed pinsound plus and speakers
i can't get any soundtrack. I downloaded one and extract it on the usb
put it in the machine, it read/transfered 100% and then it says no sound track on usb
anyone can help plz
Lot of mods and parts installed.
Dmd, pinsound card and spearkers, cpr plastics, mountain, powdercoated legs, ect
Next is to install side blades and new side arts.
8BA20C5A-BE29-4375-B11A-AB442F801690 (resized).jpegCA1D38EF-BD21-481A-9D8E-4C3F8ED5370D (resized).jpeg59A61C16-FD2C-4139-A45A-143B5F4B2306 (resized).jpegAnother issue, supercharger is getting back to slow.
What can i do? Replace all optos in ramp?
Getting a new supercharger board?
Also have a code: check switch 81, opto 1
Opto 1 is stuck open
Thx guys
30B92B4C-C2DA-4382-B984-EC68736F15E0 (resized).jpegB33B8A85-40F5-46BE-8560-ED54AF1443CE (resized).jpeghi guys, i would like to rebuild my lower flippers, i bought the rebuild kit but i assumed its a good time to put new coils at the same time?
is anyone happen to have the part number for the coil?
do i need something else at the same time or the rebuild kit is normally complete?
thx for the help.
are the springs coming with the rebuild kit
my guy told me he fixed the spring on one of the flipper
thx for the precious help guys
this is what i purchased with 2x new coils
https://pinballmedics.ca/product/williamsbally-flipper-rebuild-kit-021992-to-041993/
hopefully, i dont need other parts ?
Quoted from Haymaker:You'll need another half a kit so you can do the 3rd flipper.
the upper flipper is great, i will leave as it is for now.
thx
Quoted from Haymaker:Its just weird that you'd replace coils you don't need to replace, but you're not going to rebuild all 3 flippers at the same time.
Edit- You really should should get new bushings as well
Didn’t think about it since he looked more strong than the bottoms one, i will do it.
This? 3x time?
https://pinballmedics.ca/product/williams-bally-nylon-flipper-bushing/
just rebuilt my flippers and put new coils as well! what a difference in gameplay
now i want to rebuild all 3x pop bumpers, any guideline/ideas ?
what pop bumpers color do you guys use?
saw some cool colors on a local supplier
https://pinballmedics.ca/product/wms-bally-stern-transparent-coloured-pop-bumper-body/
https://pinballmedics.ca/product/wms-bally-stern-colored-pop-bumper-bodies/
repairing slings?
buy new leaf switches, coil sleeve and coil stop?
any kit for sale? any part numbers to help me out?
thanks again for all the help.
my getaway suffered from lack of maintenance
Quoted from Mancave:Great idea! but will it impede ball speed to lock balls up into the drop ramp?? Where before a slightly lacking shot in power might still make the ramp, after going through the spinner..... maybe not? Perhaps that's why it wasn't included in the original design as it is the obvious spot to have a spinner?
good point. i already have an hard time climbing the ramp with this shot
Can you show a picture where you put the oil? (Is it car engine oil lol ???)
Id like to try that aswell.
We also replaced all the optos and its not quicker...
Quoted from Mr_Tantrum:I used silicone oil, but tampa12 used actual synthetic motor oil (a very thin coating is all that is required).
You don't really need a picture, as you do the entire inner surface (bottom and both sides) around the entire loop. I used a microfiber clock, put the silicon oil on that (a few drops at a time), and literally rubbed the entire inner surface of the metal supercharger loop (the bottom and both sides). I also did the same to the diverter where it faces the inside of the loop, and I took the cloth and pushed it back and forth inside the supercharger where the magnets are.
BTW, what are your current supercharger test times?
Have you tested the resistance and voltage on each coil? If so, where those readings in line? If not, here is a good video that walks you through things:
Thx,
We havnt check voltage. With your video, i now understand how to do it. Will repott back in the next few days.
As for supercharger test, it was in the 150 if i remember right, i will recheck and report.
Quoted from Mr_Tantrum:I've tried carnuba wax before, but didn't get the same results. I'm not too concerned with an ultra thin layer of clear silicone oil, but I see how things go. If it ends up being a dirt magnet then I'll go back to wax.
This?
https://www.amazon.ca/Super-Lube-56504-Silicone-Clear/dp/B00OBV1LMK
i installed a khar no reset on my getaway and the color dmd is now freezing. I put back original connector and dmd is fine.
i also put it in my dirry harry and road show, both has color dmd and its fine.
anyone had this problem?
how come I dont have issue with my 2x other william pins?
not sure i want to go into removing the board and install a cap to be able to use khar product...
Quoted from TheOnlyest:You clearly have a 5v AND a 12v issue... Your PS is failing, rebuild your PS and you wont even need the Kahr board.
Thx, how to? Any link? Or purchase a new unit?
Where is this power supply located? Noob here
Thx
Quoted from transprtr4u:Just received payment request for the new Buthanburg HS2 playfields!
looking forward to receiving this although my playfield is fine, looking forward to having a new one!
great quality product with great clear coating!
Is it your first purchase at this company?
Hs2 doesnt seem in stock on their website?
Anyone can comment on build quality?
Quoted from Buthamburg:The Getaway Playfields, and all our repro playfields, are genuen Silk Screened, not digital prints.
The colors are bright and the black is a black and not a grey shade like digital prints.
Playfiels have pilot holes, dimples, on both side, top and bottom.
Id like to buy one. I emailed you
Quoted from transprtr4u:Bathburg new playfield just shipped , can't wait he does great playfields
ordered one too with a playfield protector.
new decals going in as well.
$$$$$$$$$$$
Quoted from transprtr4u:Mine came last Monday, he does great work... shame to see it sit in the box. The playfield on my game doesn't warrant a swap , but someday will get around to it...
received mine as well with a playfield protector. i will do a swap later this summer
hey guys,
my tech will start soon my PF swap and also add the PF protector.
while he's there, i would like to put some new parts.
its a game that didnt received a lot of love over the years,
on top of my head
new target switches https://www.pinballlife.com/williamsbally-round-stand-up-targets.html
new micro switches(anyone know how much of each ? )
new magnet coils(optos in supercharger are new but supercharger is still slow) https://www.pinballlife.com/williamsbally-magnet-coil-a-15685.html
new rubbers
adding cliffys
flippers were rebuilt recently
what else should i do ?
Quoted from sparksterz:Always good to do any work needed to pop bumpers while the playfield is swapped. I know some people like putting translucent red, yellow, green bodies on theirs.
Aside from that you've kinda hit the main parts of the machine...past that you can do a lot of mods
thanks
i already have color dmd, pinsound, powdercoat legs and rails, mr tandrum mods, art blades(to be installed) etc
hey guys
im doing my PF swap shortly,
i will order new targets and 1x magnet coil(i have a bad one)
otherwise, i have that on my list. am i missing something? or do I have too much(some not needed)
all flippers were rebuilt recently. it's already converted to LED and titans rubbers.
11 (resized).JPG33 (resized).JPG
I have pinsound board and their speaker kit in my getaway.
I don’t think their speakers are any better thand pp or ff
The big difference is the board that give more output to the speakers.
Quoted from Spacemanratso09:I am looking to upgrade my speakers
In the past,I’ve usually just grabbed some pinball pro as I don’t have enough experience to have a preferred supplier
I am looking for opinions on what has made a impact on other owners Getaway
Been hearing a lot about Pinsound speakers
Thanks
anyone with a new spare one or a very good used one?
The Getaway Ramp Lift Mech (B-11302)
*** I know marcos has it and some other places.
Thanks everyone for your feedback.
Getaway is at my shop and my employee replaced the plastics.
I didn’t specify him not to over tight them, so my mistake here.
My friend is doing the resto on it, new decals and new playfield.
We will fix a few other things at the same time.
My friend just started my getaway resto after finishing my fishtales resto.
Just a heads up for someone who wants to purchase the germain playfield. Sry don’t remember the brand.
Its missing some holes.
D5F4F8C4-743E-447B-BEA9-76C38D830DF8 (resized).jpeg6B1350C0-561A-4ABB-B846-DEF1EB7EC926 (resized).jpeg14DB4FCA-555D-4895-B8BE-ACCE65FFACD1 (resized).jpeg2441BEFB-CC84-4AC2-92C6-BCA95F40B7F4 (resized).jpeg
Quoted from Hapidance:Paseb
The cab looks a good !
Where Did you order the decals from?
When you installed them, did you trim at the corner or an 1/8” in from the corners
I’m looking for some advise. I need to work on my cabinet.
My friend is doing the work, but i purchased the decals about 2 years ago on ebay.
Just recently ive decided to buy a new playfield from germany and do the restore.
Thx
Some more cool stuff from my restorer ElectricLou
16280322-BDE2-4BCD-9D5A-E386E5D8A86B (resized).jpeg
Quoted from ElectricLou:Hey guys
I have a problem with the optos 2 and 3 on the supercharger.
In test mode the ball trigged them only half of the times.
I changed both the transmitters and receivers. No success.
I can trigged them with a pen easily. Every new optos have good and new solder points.
Anyone had to deal with this?
Thanks!
Please help my friend Lou so i can enjoy my newly restored getaway hehe
You're currently viewing posts by Pinsider paseb.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin?tu=paseb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.